New Colloidal Processing Techniques of Ceramic Powders

Shanyi Du

1999-01-01

Journal of Functional Biomaterials

Abstract:Ceramic powders colloidal processing techniques are used to fabricate large size,complicated shape ceramic parts of high reliability.The principles and the main technology of four new colloidal processing techniques:centrifugal casting,pressure filtration,gelcasting and direct coagulation casting are introduced in this paper.

What problem does this paper attempt to address?

Colloidal Forming Process of Advanced Ceramics

Zhang Xuejun,Zheng Yongting,Han Jiecai

DOI: https://doi.org/10.3969/j.issn.1007-2330.2006.01.003

2006-01-01

Abstract:In this paper,various colloidal forming techniques including PIM,SC,GC,DCC,HAS and EPD are introduced.The theories,forming processes and characteristics of these techniques are compared.The key problems in ceramic forming process are also indicated.
RESEARCH PROGRESS OF NEW COLLOIDAL FORMING PROCESSES FOR ADVANCED CERAMICS

Yong HUANG,Liming ZHANG,Jinlong YANG,Zhipeng XIE,Chang'an WANG,Ruifeng Chen

DOI: https://doi.org/10.3321/j.issn:0454-5648.2007.02.001

2007-01-01

Abstract:The progress of new colloidal forming processes for high performance ceramics developed in Tsinghua University is reviewed. Several new techniques for preparing highly concentrated ceramic suspensions and high-quality green bodies are briefly described, and new ideas about ceramic colloidal forming are introduced. With these new techniques, high performance ceramic parts with high reliability and complex shapes can be mass prepared, by automation, at low cost and after the removal of defects in ceramic green bodies. This may pave the way for the industrialization of advanced ceramics in the near future.
Colloidal Forming Process of Ceramic Composites

Dong Xiuzhen,Zheng Zhanshen,Zhang Jiansheng,Wang Xiuwen

DOI: https://doi.org/10.16253/j.cnki.37-1226/tq.2007.04.007

2007-01-01

Abstract:In this paper,various colloidal forming techniques including SC,PIM,GC,DCC,TIF,HAS, EPD and are introduced.The theories,forming processes and characteristics of these techniques are com- pared.The key problems in ceramic forming process are also indicated.
The New Methods And Techniques Based On Gel-Casting

Yong Huang,Jinlong Yang

DOI: https://doi.org/10.1007/978-3-642-12281-1_7

2011-01-01

Abstract:The reliability and the cost of the products, which are closely related to the preparation process, are the two major factors in the industrial production of high performance ceramics. The preparing process of ceramic powders, the forming and sintering process are thus becoming increasing important in the recent decades in the ceramic research field. As a precondition of materials design and realization of the high performance ceramic products of desired shapes, the ceramic forming process usually plays a crucial role in determining the reliability and the cost of the products. The traditional methods of producing the ceramic products have been widely used in the field of fine ceramics, but they do not meet the requirements of high performance ceramics. Therefore, enormous research efforts have been directed to devise new methods for the ceramic forming process. In this chapter, some new methods and techniques based on gel-casting are introduced, such as solid freeform fabrication (SFF) of alumina ceramic parts; freeform fabrication of aqueous alumina-acrylamide gel-casting suspensions; ceramics with special porous structures fabricated by freeze-gel-casting; solidifying concentrated Si3N4 suspensions for gel-casting by ultrasonic effects; laser machining technique of Al2O3 green ceramic, etc.. The forming mechanism is analyzed and the characteristics of the green and sintered bodies of ceramic parts using the new forming methods or new techniques are introduced.
The Transformation Mechanism from Suspension to Green Body and the Development of Colloidal Forming

Juanli Yu,Jinlong Yang,Yong Huang

DOI: https://doi.org/10.1016/j.ceramint.2011.01.019

IF: 5.532

2011-01-01

Ceramics International

Abstract:Colloidal forming is a novel wet-processing way to prepare complex shaped ceramic parts with high reliability at low cost. In this article, the transformation mechanisms from suspension to green body and the development of colloidal forming are reviewed. The transformation from suspension to green body in colloidal forming is mainly dependent on the characteristics of suspension, and solidification is the key link in colloidal forming. Various colloidal forming methods are developed to produce ceramic parts, and these methods include slip casting, tape casting, direct coagulation casting, injection molding, gel-casting and so on. The study of defects during colloidal forming should be focused on the defects formation, inheritance and evolution during drying, de-binding and sintering processes. External free controllable technology of colloidal forming is an effective way to achieve ceramic fabrication industrialization, and stress-free colloidal forming is important for the future development of ceramic fabrication. (C) 2011 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
Recent Developments in Gelcasting of Ceramics

Jinlong Yang,Juanli Yu,Yong Huang

DOI: https://doi.org/10.1016/j.jeurceramsoc.2010.12.035

IF: 5.7

2011-01-01

Journal of the European Ceramic Society

Abstract:Gelcasting is a well-established colloidal processing method with a short forming time, high yields, high green capacity and low-cost machining, and has been used to prepare high-quality and complex-shaped dense/porous ceramic parts. In this article, we reviewed recent developments in gelcasting technology for ceramic preparation. For environmental pollution reduction during ceramic preparation by gelcasting, the development of low-toxic and nontoxic gelcasting systems is discussed. The occurrence and control of inner stress and surface-exfoliation in ceramic green bodies prepared by gelcasting are analyzed, and then some methods to control and eliminate the inner stress and surface-exfoliation in ceramic gelcast green bodies, especially for colloidal injection molding of ceramics (CIMC) are proposed. Finally, the applications of gelcasting for the fabrication of porous ceramics and complex-shaped ceramics (e.g., microbeads, rutile capacitor, thin-wall rutile tube, refractory nozzle) are summarized.
Colloidal injection moulding of ceramics induced by pressure

Liang Su,Jinlong Yang,Liguo Ma,ChunLei Dai,Yong Huang

2002-01-01

Rare Metal Materials and Engineering

Abstract:Gel-casting and injection moulding are two forming techniques thought to be the possible solution of the industrialization of high performance ceramics. However their several disadvantages limit their application and progress. Colloidal injection moulding of ceramics is a new ceramic forming technique which combines the advantages of gel-casting and injection moulding. High performance ceramics with complex shape and all kinds of cross section can be manufactured by the new technique with high reliability, high automation and low cost,which makes it possible to realize the industrialization of high performance ceramics.
Improving the Homogeneity and Reliability of Ceramic Parts with Complex Shapes by Pressure-Assisted Gel-Casting

Y Huang,LG Ma,HR Le,JL Yang

DOI: https://doi.org/10.1016/j.matlet.2004.08.015

IF: 3

2004-01-01

Materials Letters

Abstract:Forming process plays an important role in the homogeneity and reliability of advanced ceramic products. Inspired by the surprising observation of pressure-induced solidification in colloidal forming processes, the authors have developed a new ceramics forming process, colloidal injection moulding, with the potential of forming large ceramic parts of complex shapes such as engine turbines and biomedical implants. This process combines the advantages of the conventional injection moulding and gel-casting processes of ceramics. Not only the efficiency but also the homogeneity of the green body is greatly improved owing to the pressure-induced solidification. It is also found that the inner stress generated by non-uniform solidification due to temperature gradient is responsible for the origination of microstructural defects in green body during colloidal-forming processes. A new strategy is taken to reduce the inner stress by adjusting the stiffness of the green body using a moderator additive. Ceramic products with complex shape such as engine turbines have successfully been fabricated with reduced defects.
Improved Gelcasting

Jt Ma,Zp Xie,Hz Miao,Y Huang,Yb Cheng

2003-01-01

American ceramic society bulletin

Abstract:Gelcasting is a ceramic colloidal forming approach that has received worldwide attention during the past 10 years. The gelcasting technique is based on traditional ceramic processing and polymer chemistry. The process uses a monomer solution that can be polymerized to form a strong, cross-linked polymer-solvent gel. Such a solution provides a low-viscosity vehicle for carrying the ceramic powder. This paper focuses on an attempt to resolve the surface-exfoliation problem using chemical methods.
Processing and Characterization of Ceramic Powders

DOI: https://doi.org/10.31399/asm.hb.emde.a0003052

1995-11-01

Abstract:Abstract This article explains how ceramic powders are made. It begins by briefly describing the raw materials used in structural clay products, whitewares, refractories, and advanced ceramics. It then examines various additives that promote uniformity at different stages of the process. After a description of the comminution process (wet and dry milling methods), it discusses batching and mixing operations and granulation methods. The article also deals with the effect of process variables and the steps involved in chemical synthesis, including preparation from solution and gas-phase reactions, filtration and washing, and powder recovery techniques. It concludes with a discussion on characterization, centering on size distribution analysis, specific surface area, density, porosity chemical composition, phase, and surface composition.
Processing Methods for the Preparation of Porous Ceramics

Rizwan Ahmad,Jang-Hoon Ha,In-Hyuck Song

DOI: https://doi.org/10.4150/kpmi.2014.21.5.389

2014-10-28

Journal of Korean Powder Metallurgy Institute

Abstract:Macroporous ceramics with tailored pore size and shape could be used for well-established and emerging applications, such as molten metal filtration, biomaterial, catalysis, thermal insulation, hot gas filtration and diesel particulate filters. In these applications, unique properties of porous materials were required which could be achieved through the incorporation of macro-pores into ceramics. In this article, we reviewed the main processing techniques which can be used for the fabrication of macroporous ceramics with tailored microstructure. Partial sintering, replica templates, sacrificial fugutives, and direct foaming techniques was described here and compared in terms of microstructures and mechanical properties that could be achieved. The main focus was given to the direct foaming technique which was simple and versatile approach that allowed the fabrication of macro-porous ceramics with tailored features and properties.
Surface Treatment and Modification of Al2O3 Powders

Xin Yingchun,Qi Longhao,Pan Wei

2011-01-01

Rare Metal Materials and Engineering

Abstract:The size degradation and pelletization of ceramic powders are key steps of making green compacts of high density and ceramic parts of high performance. In this paper, a horizontal stirring mill was used for the size degradation of Al2O3 powder and the effects of different binders for Al2O3 granulating were studied. A new granulating process with the slurry for granulating prepared by gel-casting was proposed. The results show that compared with the traditional granulating process, particles prepared by the new process have smooth surface and are regular shaped. The flowing property and the mold ability gain a great improvement.
Fabrication of composite particles with core-shell structures by a novel processing

Yue-Feng Tang,Ai-Dong Li,Hui-Qin Ling,Yi-Jun Wang,Qi-Yue Shao,Yi-Nong Lu,Zhi-Da Ling

DOI: https://doi.org/10.1023/A:1016597108481

IF: 4.5

2002-01-01

Journal of Materials Science

Abstract:In order to solve the difficult problem of heterogeneity of different components in the procedure of ceramic preparation, novel processing (heterogeneous nucleation-and-growth processing) was used to prepare a homogeneous distribution of powders. Composite coated particles with core-shell structures were prepared by the heterogeneous nucleation-and-growth processing. The effects of silica content in composite coating particles versus concentration of tetraethylorthosilicate, pH value, reaction time and reaction temperature were studied. The amorphous silica shell on the cores was confirmed by X-ray diffraction, transmission electron microscopy and zeta potential measurement.
Application Of New Colloidal Forming

Yong Huang,Jinlong Yang

DOI: https://doi.org/10.1007/978-981-15-1872-0_6

2011-01-01

Abstract:The colloidal forming process based on gel-casting was applied for preparing microbeads of ceramics, improving the breakdown strength of rutile capacitor, developing the thin-wall rutile tube for ozone generator, and producing the refractory nozzle of zirconia (ZrO2) and lead zirconate titanate (PZT). The microbeads of ceramics were used as grinding media, gel-pen-ball and healthcare product with far infrared function for human body. Owing to the low-cost associated with the production of the gel-beads as well as because of its superior properties, they have been widely used and marketed.When compared with the extrusion forming, the breakdown strength of rutile capacitor prepared by gel-casting was improved greatly. The rutile ceramics with high dielectric constant and high breakdown strength have been used in thin-wall tube of ozone generator.ZrO2 refractory nozzle prepared by gel-casting has a high melting point above 2680 degrees C and a good thermal shock resistance to withstand the temperature rising from the room temperature to 2200 degrees C in several seconds. Hence, it is considered as a suitable material for making the nozzle for precision casting of Cu-Cr molten alloy.When compared with die pressing, gel-casting can provide a more homogenous microstructure as well as better piezoelectric property of the PZT samples. By using the same sintering procedure, gelcast samples were observed to exhibit slightly stronger piezoelectric effects than the die pressed ones. This may be attributed to both density difference and pore size.
Colloidal Processing of Complex-Shaped ZrB2-Based Ultra-High-Temperature Ceramics: Progress and Prospects

Guoqian Liu,Changhai Yan,Hua Jin

DOI: https://doi.org/10.3390/ma15082886

2022-04-14

Abstract:Ultra-high-temperature ceramics (UHTCs), such as ZrB2-based ceramics, are the most promising candidates for ultra-high-temperature applications. Due to their strong covalent bonding and low self-diffusion, ZrB2-based UHTCs are always hot-pressed at temperatures above 1800 °C. However, the hot-pressing technique typically produces disks or cylindrical objects limiting to relatively simple geometrical and moderate sizes. Fabrication of complex-shaped ZrB2-based UHTC components requires colloidal techniques. This study reviews the suspension dispersion and colloidal processing of ZrB2-based UHTCs. The most important issues during the colloidal processing of ZrB2-based UHTCs are summarized, and an evaluation of colloidal processing methods of the ZrB2-based UHTCs is provided. Gel-casting, a net or near-net colloidal processing technique, is believed to exhibit a great potential for the large-scale industrialization of ZrB2-based UHTCs. In addition, additive manufacturing, also known as 3D printing, which has been drawing great attention recently, has a great potential in the manufacturing of ZrB2-based UHTC components in the future.
Research Progess in Ceramic Gelcasting Process

LI Chengliang,ZHA Xingyu,GUO Wenli,LIANG Tongxiang

DOI: https://doi.org/10.3321/j.issn:1005-023x.2007.05.010

2007-01-01

Abstract:In this paper,the research and development of ceramics gel casting are mainly discussed. The principle and method of gel casting,including reaction mechanism,process parameters, feasibility and the foreground of the process are briefly reviewed. Some new gelcasting techniques are reviewed as well.The developing prospect of gelcasting is forecasted and some problems that should be paid attention to and solved in gelcasting process are also discussed.
Chemical vapor processing and applications for nanostructured ceramic powders and whiskers

W. Chang,G. Skandan,S.C. Danforth,B.H. Kear,H. Hahn

DOI: https://doi.org/10.1016/0965-9773(94)90058-2

1994-09-01

Nanostructured Materials

Abstract:A new chemical synthetic process for producing non-agglomerated nanostructured ceramic (n-ceramic) powders from metalorganic precursors is described. The process combines rapid thermal decomposition of a precursor/carrier gas stream in a hot tubular reactor with rapid condensation of the product particle species on a cold substrate under a reduced inert gas pressure of 1–50 mbar. A wide variety of metalorganic precursors is available commercially, all of which can be utilized in this process to produce n-ceramic powders, including single phase, multiphase and multicomponent systems. The process has been used to synthesize nonagglomerated n-SiCxNy and n-ZrOxCy powders, with controlled particle size in the range 2–20 nm. Heat treatment of the as-synthesized n-powders in various high purity gas streams causes compositional and structural modifications, including particle purification and crystallization, as well as transformation to a whisker-like morphology. Non-agglomerated n-ceramic powders form uniformly dense powder compacts by cold pressing, which can be sintered to theoretical density at temperatures as low as 0.5 Tm.

English Else
Technology and Equipment on Collide Injection Moulding of Ceramics

Jin Long Yang,Chun Lei Dai,Liang Su,Yong Huang

DOI: https://doi.org/10.4028/www.scientific.net/KEM.280-283.739

2007-01-01

Key Engineering Materials

Abstract:Colloidal injection moulding of ceramics (CIMC) is a new ceramic forming technique that combines the advantages of gelcasting and injection moulding. It can inject nonplastic slurry into the mould and solidification course of ceramics slurry can be controlled by both temperature and pressure. Quick mixing technique ensures that ceramic slurry will not be solidified before casting. The equipment of CIMC was designed and developed. High performance ceramic components with complex shape have been manufactured by this equipment.
Dispersion Technique Application in Advanced Ceramic Manufacture

宁叔帆,陈维,刘斌,陈寿田

DOI: https://doi.org/10.3969/j.issn.1003-8337.2004.03.008

2004-01-01

Abstract:The dispersion mechanism of ceramic powders,especially that of nanometer class powders was discussed.The mechanism includes electrostatic stabilization,steric stabilization and electrosteric stabilization.This technology was applied widely to the research and synthesis of advanced ceramic.
Application of Silica Sol-Gel in Colloidal Forming of Ceramics

JS Luo,ZP Xie,JT Ma,Y Huang,YB Cheng

DOI: https://doi.org/10.3321/j.issn:1000-324x.2003.06.010

2003-01-01

Abstract:A novel colloidal forming processing of ceramics was investigated. The characteristic of silica sol-gel was applied successfully to colloidal forming of ceramics. The process is based on the casting of the slurry, containing powder and silica sol prepared by hydrolysis of tetraethoxysilane (TEOS) at pH 12.8. Then the mixture forms gelled parts through silica sol-gel. Ceramic green parts with strength of 5MPa can be obtained by this method. The forming process has advantages of low toxicity and high consolidation rate.

New Colloidal Processing Techniques of Ceramic Powders

Colloidal Forming Process of Advanced Ceramics

RESEARCH PROGRESS OF NEW COLLOIDAL FORMING PROCESSES FOR ADVANCED CERAMICS

Colloidal Forming Process of Ceramic Composites

The New Methods And Techniques Based On Gel-Casting

The Transformation Mechanism from Suspension to Green Body and the Development of Colloidal Forming

Recent Developments in Gelcasting of Ceramics

Colloidal injection moulding of ceramics induced by pressure

Improving the Homogeneity and Reliability of Ceramic Parts with Complex Shapes by Pressure-Assisted Gel-Casting

Improved Gelcasting

Processing and Characterization of Ceramic Powders

Processing Methods for the Preparation of Porous Ceramics

Surface Treatment and Modification of Al2O3 Powders

Fabrication of composite particles with core-shell structures by a novel processing

Application Of New Colloidal Forming

Colloidal Processing of Complex-Shaped ZrB2-Based Ultra-High-Temperature Ceramics: Progress and Prospects

Research Progess in Ceramic Gelcasting Process

Chemical vapor processing and applications for nanostructured ceramic powders and whiskers

Technology and Equipment on Collide Injection Moulding of Ceramics

Dispersion Technique Application in Advanced Ceramic Manufacture

Application of Silica Sol-Gel in Colloidal Forming of Ceramics