Abstract:The pre-bored grouting planted nodular (PGPN) pile is a type of composite pile foundation that is considered to be environmentally friendly and economical. A simplified approach, which considers the two interfaces of the pile shaft, was proposed to analyze the load-displacement response of a single PGPN pile. An elastic-failure model, based on the shear test results, was used to simulate the shearing behavior of the concrete-cemented soil interface. A hyperbolic nonlinear model, considering the influence of cement paste injection, was created to simulate the behavior between the skin friction and the relative displacement developed along the cemented soil-soil interface. A linear model and a nonlinear model that considers the reduction in the shearing stiffness were used to simulate the PGPN pile base load-displacement responses in a field test and in a model test, respectively. Comparisons between the calculated and measured load-displacement responses revealed relatively good agreement. The proposed approach is thus shown to be efficient and suitable for the analysis of a single PGPN pile embedded in layered soils, and is used to analyze the factors influencing its behavior. Enlarged cemented soil base is considered to be effective in promoting the behavior of a short PGPN pile, while increasing the diameter of cemented soil along the shaft is efficient in promoting the compressive bearing capacity of a long PGPN pile.

A Method for Calculation of the Bearing Capacity of Cast-In-Situ Piles with Expanded Branches and Plates

A NEW CALCULATION METHOD FOR LARGE-DIAMETER-TUBULAR-PILE BEARING CAPACITY

Assessment of design methods for axial bearing capacity of driven piles in clay

STUDY ON VERTICAL BEARING CAPACITY OF LARGE-DIAMETER CAST-IN-SITU THIN-WALL TUBULAR PILE

Calculation Method for Ultimate Bearing Capacity of Structure and Its Convergence

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

A Calculation Method of Bearing Capacity of Single Squeezed Branch Pile Based on Load Transfer Method

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Model tests on the bearing capacity of precast oxen-ended micro pipe plies in sort soil

Improved Computational Method Based Upon Slip-line Field Theory For Passive Plies For Practical Use

Experimental Study on Bearing Capacity Behavior of Deep Large Diameter Cast-in-place Belled Pile

RESEARCH ON INFLUENCE OF SOIL CORE ON BEARING CHARACTER OF LARGE-DIAMETER TUBULAR PILE USING CAST-IN-SITU CONCRETE

Field Tests and Simplified Calculation Method for Static Drill Rooted Nodular Pile

A test on base bearing capacity of static drill rooted nodular pile

Analysis of Axial Load-Transfer of Large-Diameter Cast-in-situ Tubular Pile

Calculation method for the ultimate bearing capacity of pressure-cast-in-situ pile with spray-expanded frustum

Calculation Method of Uplift Capacity of Pile-Anchor Composite Foundation and Influence of Parameters

Study on Axial Bearing Properties of Cast-in-place Concrete Thin-Wall Tubular Piles

A Simplified Nonlinear Calculation Method to Describe the Settlement of Pre-Bored Grouting Planted Nodular Piles

Solution of the Ultimate Bearing Capacity at the Tip of a Pile in Inclined Rocks Based on the Hoek-Brown Criterion

Bearing Behavior of a New Type of Prestressed Pipe Pile with Rib