Abstract:Multi-walled carbon nanotubes (MWNTs), having a diameter around 10~20 nm, were used as reinforcement for electrodeposition of Ni. Compact and smooth Ni-carbon nanotubes composite coatings were prepared by electrodeposition in Ni plating bath containing homogeneously dispersed carbon nanotubes with the aid of interval ultrasonic agitation and air agitation. The morphologies of the composite films were observed on a scanning electron microscopy (SEM), and roughness was tested on stylus profiler. The hardness of the films was examined on the micro hardnss instrument and nano hardness instrument respectively. Tensile strength of the thin composite film was measured on a new micro-tensile device. It was found that the introduction of MWNTs in the electrodeposition of Ni with the aid of interval ultrasonic agitation and air agitation would greatly increase the hardness of the composite films, which reached its climax when the content of MWNTs was around 4%. The tensile strength of the composite film is also slightly improved, The SEM image of the fracture prove this reinforcement effect.

Carbon-nanotube metal-matrix composites prepared by electroless plating

Research of Carbon Nanotubes with Electroless Plating of Cobalt

Coating of Carbon Nanotube with Nickel by Electroless Plating Method

ELECTROLESS PLATED MULTIWALLED CARBON NANOTUBES FOR REINFORCING METAL-MATRIX COMPOSITES

Influence on (Ni-P) Electroless Composite Plating with Carbon Nanotubes

Electroless Plating Ni-P Matrix Composite Coating Reinforced by Carbon Nanotubes

Preparation of coating of carbon nanotube with nickel-cobalt alloy

Research of Carbon Nanotubes with Electroless Plating of Nickel

SYNTHESIS AND THE PERFORMANCE OF CARBON NANOTUBES-(Ni-P) COMPOSITES

Recent Advances in Metal/Alloy Nano Coatings for Carbon Nanotubes Based on Electroless Plating

Preparation of Cu-based composite materialsreinforced by nanotube by powder-metallurgy

Electroless Plating of Co-Fe on the Surface of MWCNTs

Electrodeposition and Properties of Composites Consisting of Carbon Nanotubes and Copper

Electroplating of Carbon Nanotube/Nanofiber Ag Composite Coatings

Preparation and Application of Multi-Walled Carbon Nanotubes and Metal Cobalt Nanoparticles Composite Carbon Fiber Electrodes

Preparation, Mechanical and Electrical Properties of Carbon Micro- and Nanocoils

Preparation and Tribological Properties of the Carbon Nanotubes–ni–p Composite Coating

Influence of Plating Time and Concentration on the Thickness of the Ni Coating on Carbon Nanotubes

Properties of Carbon Nano-tubes/Magnesiuum Matrix Composite by Casting

Electrodeposition of Ni Matrix Carbon Nanotubes Composite Films

Electrodeposition and Mechanical Characterization of Ni-carbon Nanotubes Composite Coatings