Abstract:The type and content of particles in the plating solution greatly affect the electrodeposition process, making it important to study the effect of carbon nanotubes (CNTs) on the electrodeposition of nickel during the preparation of CNTs/Ni composites. In this paper, cyclic voltammetry (CV), linear sweep voltammetry (LSV), chronoamperometric analysis (CA), and electrochemical impedance spectroscopy (EIS) were adopted to study the nucleation mechanism in the early stage of electrocrystallization . Field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) were used to reveal the electrocrystallization properties. The results showed that Ni was electrodeposited by 3D nucleation/growth and was controlled by diffusion and electrochemical kinetics. Increasing the CNTs concentration shortened the time required for 3D growth. Additionally, the polarizability of the electrodeposited nickel increased upon increasing the CNTs content, which helped increase the electro-crystallization probability of Ni. As the concentration of CNTs increased, the charge transfer resistance decreased, the Ni nucleation activation energy decreased, and the Ni nucleation became easier. The introduction of CNTs changed the preferred growth orientation of pure nickel, and the surface growth morphology was mainly a spiral in a stepwise pyramid.

Electroplating of Carbon Nanotube/Nanofiber Ag Composite Coatings

Influence on (Ni-P) Electroless Composite Plating with Carbon Nanotubes

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

SYNTHESIS AND THE PERFORMANCE OF CARBON NANOTUBES-(Ni-P) COMPOSITES

Preparation and Tribological Properties of the Carbon Nanotubes–ni–p Composite Coating

Electrodeposition and Mechanical Characterization of Ni-carbon Nanotubes Composite Coatings

Preparation and Application of Multi-Walled Carbon Nanotubes and Metal Cobalt Nanoparticles Composite Carbon Fiber Electrodes

Electrodeposition of Ni Matrix Carbon Nanotubes Composite Films

Pulsed Electrodeposition of Carbon Nanotubes-Hydroxyapatite Nanocomposites for Carbon/carbon Composites

ELECTROLESS PLATED MULTIWALLED CARBON NANOTUBES FOR REINFORCING METAL-MATRIX COMPOSITES

Composite Electroless Nickel-nano Al2O3 Coatings on Steel Substrate

Electrodeposition and Properties of Composites Consisting of Carbon Nanotubes and Copper

Preparation of electroplated Ni-P-ultrafine diamond, Ni-P-carbon nanotubes composite coatings and their corrosion properties

The fabrication and corrosion behavior of electroless Ni–P-carbon nanotube composite coatings

A Comparative Research on Auxiliary Processes for Copper Based Carbon Nanotube Composite Electroplating

Electrochemical co-deposition of carbon nanotube/Ni composite layer

A Novel Method for Fabricating Nanocomposite Coatings

Single-walled Carbon Nanotube-Reinforced Copper Composite Coatings Prepared by Electrodeposition under Ultrasonic Field

Recent Advances in Metal/Alloy Nano Coatings for Carbon Nanotubes Based on Electroless Plating

Electroless nickel plating on the surface of carbon fibers

Electroplating Process of Nano-Ni-Al2O3 Composite Coatings