Abstract:In this study, deposition of copper nanoparticles is synthesized by nanocomposite of carbon nanotube oxide modified with poly citric acid (Cu@CNTO/PCA) and a mixture of amine and poly citric acid (Cu@CNTO-amine/PCA) in different weight concentrations. The thickness, weight, conductivity and resistance of electrical, and hardness of the copper coating on the electrode are calculated after optimizing the parameters of current density (3000 mV), deposition time (45 min), stirring speed (300 rpm), and pH (2–3) at ambient temperature. To analyze the copper coating created on the electrode, the most well-known and widely used techniques are used: Fourier Transform Infrared spectroscopy (FT-IR), Atomic Force Microscope (AFM), Field Emission Scanning Electron Microscope (FE-SEM), and X-ray Energy Diffraction spectroscopy (EDX). The addition of carbon nanotubes enhances the process of nucleation and modification of grains and reduces the oxidation of copper, thus improving the mechanical properties of the copper coating. So, the electrical conductivity of the copper coating reaches 1526 μs.cm −1 in 40 wt.% of Cu@CNTO-amine/PCA nanocomposite at a current density of 3000 mV. Another advantage of this deposition method is at ambient temperature so that the copper coating turns black when the temperature increases to 35 °C. The modification of the surface with poly citric acid causes more dissolution and distribution of CNTO in the electrolyte solution keeps the pH of the environment in the range of 2–3 during deposition and causes the synthesis of shiny copper coatings. Urea-containing nanocomposite increases the electrical conductivity and stability of the copper coating, and compared to graphene oxide nanoparticles, it solves the problems of oxygen functional groups and provides its thermal stability. The results show that the thickness of the encapsulated copper coating layer depends on the chemical composition of the electrolyte, temperature, current duration, and current intensity. By controlling these factors, the thickness of the coated copper layer can be adjusted in the range of 1 to 10 μm. The method employed in this paper enables the controlled synthesis of metal-nanomaterial composites that can potentially be processed into high-capacity electrical conductors.

Single-walled Carbon Nanotube-Reinforced Copper Composite Coatings Prepared by Electrodeposition under Ultrasonic Field

Cold-sprayed Cu Matrix Composite Coatings with Core-Shell Structured Co@WC Reinforcements on Q235 Steel

Nickel-Coated Super-Aligned Carbon Nanotube Reinforced Copper Composite for Improved Strength and Conductivity

Structure and Properties of Electrocodeposited Cu-Al2o3 Nanocomposite Thin Films

A Study of Silver Decoration on Carbon Nanotubes via Ultrasonic Chemical Synthesis and Their Reinforced Copper Matrix Composites

Nanoparticle Reinforced Metal Composites Prepared by Electrocodeposition

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Enhanced Wear Performance of Cu-Carbon Nanotubes Composite Coatings Prepared by Jet Electrodeposition.

Deformation and Fracture Behavior of Electrocodeposited Alumina Nanoparticle/Copper Composite Films

Enhanced electrical conductivity and hardness of Copper/Carbon Nanotubes composite by tuning the interface structure

Enhancement of ultimate tensile strength and ductility of copper matrix composites using a low content of single-wall carbon nanotubes

Nano-silver modified carbon nanotubes to reinforce the copper matrix composites and their mechanical properties

Mechanical and Conductive Properties of Cu Matrix Composites Reinforced by Oriented Carbon Nanotubes with Different Coatings

Increasing Electrical Conductivity of Copper Nanocomposite By Carbon Nanotube Oxide Modified With Poly Citric Acid And Urea

Characterization of electrochemical deposition of copper and copper(I) oxide on the carbon nanotubes coated stainless steel substrates

Improving comprehensive performance of copper matrix composite by spray pyrolysis fabricated CNT/W reinforcement

Enhancement of mechanical properties and conductivity in carbon nanotubes (CNTs)/Cu matrix composite by surface and intratube decoration of CNTs

Investigation of the mechanical behavior of the carbon nanotubes coated copper composite materials

Preparation of Ultra-thin sandwich Cu-Cu/CNTs-Cu Composite Foil with High Tensile Strength by Electrodeposition

Superaligned Carbon Nanotubes Reinforced Copper Nanocomposites with Enhanced Strength and Electrical Conductivity

Achieving high ductility in layered carbon nanotube/copper composite prepared by composite electrodeposition