Abstract:The paper considers the method of computer simulation of the stress-strain state of the drive drum shell in the NASTRAN integrated environment. Due to the complexity of determining stresses and deformations in the drum sections by the analytical method, it is proposed to solve this important problem using the numerical finite-element method. At the preliminary stage of computer modeling, a mechanical design scheme was developed, including a variable pressure that changes depending on the angle of rotation of the drum, the deterministic relations describing the variable force factors are based on the Euler ratio. It is also proposed to take into account the pressure from the variable friction force, which depends on the changing coefficient of adhesion of the belt to the drum. As a result of the computer calculation, the equivalent Mises stresses of 65 MPa were determined, the safety factor was 4.2 and the components of the tangential stresses were determined using the stress tensor marker, the shear stress reached the level τ=16 MPa for fabric tape and τ=3.14 MPa for rubber tape. According to the results of the calculation, the dependence of the tangential stresses on the angle of rotation of the drum was constructed. A diagram of the change in the component of tangential stresses along the forming shell of the drum was constructed. Analysis of stress-strain state allowed us to determine the factor of safety of the drum shell. Based on the analysis of equivalent stresses, it is proposed to further calculate the durability of the drum using the method of long-term fatigue. The computer calculation of shear stresses in the component allows choosing the rational parameters of the lining, based on such indicators as peel strength and break, as well as determining the angle 61° of the slab lining required to improve the reliability and traction ability of the pipeline

Drum Stress Analysis for Self-emptying Scrap Iron De-oiling Centrifuge

The Finite Element Analysis on Can Coiler of Gilling Machine

Study on the Design Method of Equal Strength Rim Based on Stress and Fatigue Analysis Using Finite Element Method

Stress analysis of driving drum of belt conveyor

STUDY OF BEARING CAPACITY AND COMPLETE STRESS-STAIN CURVES FOR CONCRETE FILLED SQUARE STEEL TUBE COLUMNS

ANALYSIS STUDY ON BENDING FATIGUE TEST OF AUTOMOBILE WHEELS

Finite Element Analysis of Crude Oil Tank Based on Contact Simulation

Reliability-based design on centrifuge concrete filled steel tubular members

Development of a technique for computer simulation of the stress state of the drive drum shell of a belt conveyor to optimize its design parameters

Analysis of the Stress around the Shell-to-bottom Fillet Welds of Large Oil Tanks

Safety evaluation of deformed coke drum with nested stress at cold spot

Study of Boiler Drum Stress On-Line Detection Program Based on Finite Element Method

3-D Dynamic Elastic–plastic FEA for Rotating Disk Indirect Bar–bar Tensile Impact Apparatus: Numerical Analysis for the Generation of Mechanically-Filtered Incident Stress Pulses

Top Drive Turned Back Lug Stress Test and Finite Element Analysis

Finite Element Analysis and Testing of Centrifuge Rotor Mechanical Property

Finite Element Analysis of Large-scale High-Pressure Cast Iron Dryer

Experimental Investigation and Analysis on Dynamic Strain of Leading Trailing Shoe Drum Brake

Mechanics Calculation and Analysis on Middle Pan of Scraper Conveyor

A Study on the Dynamic Transmission Law of Spiral Drum Cutting Coal Rock Based on ANSYS/LS-DYNA Simulation

Design And Analysis Of Drum Lathe For Manufacturing Large-Scale Optical Microstructured Surface And Load Characteristics Of Aerostatic Spindle