Abstract:The effects of the design parameters of the anode diffusion layer (DL), including the PTFE loading in the backing layer (BL), and the carbon and PTFE loading in the microporous layer (MPL), on water transport through the membrane and the performance of a liquid-feed direct methanol fuel cell (DMFC) are experimentally investigated. The results indicate that increasing the PTFE loading in the BL and introducing a MPL could decrease water crossover through the membrane without sacrificing cell performance when the feed methanol concentration is increased. It is also found that changing the PTFE loading in the MPL has little effect on water crossover, whereas increasing the carbon loading in the MPL could noticeably decrease the water-crossover flux. Nevertheless, the ability of the MPL to reduce water crossover is limited by the presence of a number of mud cracks. To reduce further the water-crossover flux, a crack-free MPL made of multi-walled carbon nanotubes (MWCNTs) and PTFE is proposed. Tests indicate that the DMFC with the nanotube MPL results in a much lower water-crossover flux than a conventional carbon-powder MPL. More importantly, the use of the nanotube MPL allows the DMFC to be operated with a higher methanol concentration, and thereby increases the fuel cell system energy density.

Effects of Chloride Anion As A Potential Fuel Impurity on Dmfc Performance

Effect of Water Concentration in the Anode Catalyst Layer on the Performance of Direct Methanol Fuel Cells Operating with Neat Methanol

Effects of Hydrolysis Degree on Ion-Doped Anion Exchange Membranes in Direct Borohydride Fuel Cells

Effects of PH3 and CH3Cl Contaminants on the Performance of Solid Oxide Fuel Cells

Effects Of Anode Diffusion On Direct Methanol Fuel Cell (Dmfc) Performance

A Study of the Direct Dimethyl Ether Fuel Cell Using Alkaline Anolyte

Experimental investigation on influences of methanol reformate impurities in performances of high temperature proton exchange membrane fuel cells

Chlorine Contaminants Poisoning of Solid Oxide Fuel Cells

Effects of Sodium Chloride on PEMFC Durability at a Concentration Close to that of a Marine Environment

Experimental Study of DMFC Based on Operating Parameters

Effect of the Cathode Gas Diffusion Layer on the Water Transport Behavior and the Performance of Passive Direct Methanol Fuel Cells Operating with Neat Methanol

The Effect of Methanol Concentration on the Performance of A Passive Dmfc

Effect of Methanol Concentration on Performance of Passive DMFC

Electrochemical impedance spectroscopic studies of non-fluorinate proton exchange membranes in Dmfc

Influence of operation conditions on the performance of single direct methanol fuel cell

Effects of Anode Microporous Layers Made of Carbon Powder and Nanotubes on Water Transport in Direct Methanol Fuel Cells

Effect of flow characteristics and temperature on performance and efficiency of a direct methanol fuel cell stack

Effect of methanol crossover on the cathode behavior of a DMFC: A half-cell investigation

Effect of Anode Current Collector on the Performance of Passive Direct Methanol Fuel Cells

Effect of Anode Backing Layer on the Cell Performance of a Direct Methanol Fuel Cell

Effect of RuO2·xH2O in Anode on the Performance of Direct Methanol Fuel Cells