Abstract:It is desirable to operate a direct methanol fuel cell (DMFC) with neat methanol to maximize the specific energy of the DMFC system, and hence increasing its runtime. A way to achieve the neat-methanol operation is to passively transport the water produced at the cathode through the membrane to the anode to facilitate the methanol oxidation reaction (MOR). To achieve a performance of the MOR similar to that under the conventional diluted methanol operation, both the water transport rate and the local water concentration in the anode catalyst layer (CL) are required to be sufficiently high. In this work, a thin layer consisting of nanosized SiO2 particles and Nafion ionomer (referred to as a water retention layer hereafter) is coated onto each side of the membrane. Taking advantage of the hygroscopic nature of SiO2, the cathode water retention layer can help maintain the water produced from the cathode at a higher concentration level to enhance the water transport to the anode, while the anode retention layer can retain the water that is transported from the cathode. As a result, a higher water transport rate and a higher water concentration at the anode CL can be achieved. The formed membrane electrode assembly (MEA) with the added water retention layers is tested in a passive DMFC and the results show that this MEA design yields a much higher power density than the MEA without water retention layers does.

Effect of Water Concentration in the Anode Catalyst Layer on the Performance of Direct Methanol Fuel Cells Operating with Neat Methanol

Effect of the Cathode Gas Diffusion Layer on the Water Transport Behavior and the Performance of Passive Direct Methanol Fuel Cells Operating with Neat Methanol

The Effect of Methanol Concentration on the Performance of A Passive Dmfc

Enhancement of Water Retention in the Membrane Electrode Assembly for Direct Methanol Fuel Cells Operating with Neat Methanol

Effect of Methanol Concentration on Performance of Passive DMFC

Effect of Methanol Concentration on the Operation Performances for Passive Air-Breathing Direct Methanol Fuel Cell

Effects of Anode Microporous Layers Made of Carbon Powder and Nanotubes on Water Transport in Direct Methanol Fuel Cells

Moisturized Anode and Water Management in a Passive Vapor-Feed Direct Methanol Fuel Cell Operated with Neat Methanol

Effect of anode micro-porous layer on species crossover through the membrane of the liquid-feed direct methanol fuel cells

Characteristics of Heat and Mass Transport in a Passive Direct Methanol Fuel Cell Operated with Concentrated Methanol

Effect of Additive on Performance of Direct Methanol Fuel Cell

Effect of wettability of anode microporous layer on performance and operation duration of passive air-breathing direct methanol fuel cells

Enhanced Water Management and Fuel Efficiency of a Fully Passive Direct Methanol Fuel Cell with Super-Hydrophilic/-Hydrophobic Cathode Porous Flow-Field

Influence of operation conditions on the performance of single direct methanol fuel cell

Experimental Study of DMFC Based on Operating Parameters

Analysis of Mass Transport of Methanol at the Anode of A Direct Methanol Fuel Cell

Effect of Fabrication and Operating Parameters on Electrochemical Property of Anode and Cathode for Direct Methanol Fuel Cells

Utilization and Positive Effects of Produced Co2 on the Performance of A Passive Direct Methanol Fuel Cell with A Composite Anode Structure

Operational and Structural Aspects of a Vapor-Feed Semi-Passive Direct Methanol Fuel Cell Supplied with Concentrated Methanol

Direct Methanol Fuel Cells : Methanol Crossover and Its Influence on Single DMFC Performance

Effect of Anode Backing Layer on the Cell Performance of a Direct Methanol Fuel Cell