Abstract:Short-arc pulsed gas metal arc welding (P-GMAW) was used to solve the difficulties of molten pool spreading and droplet transfer of Ni-based welding wire. Suppression of short-circuit current was used to reduce spatter. Arc length stabilizer was used to acquire a proper and stable arc length maintained at the critical position where short circuit starts to occur. Short-arc P-GMAW with or without arc length stabilizer was compared. The droplet transfer, arc behaviors and weld bead profiles were investigated and compared based on the high-speed photography and observation of weld cross-section. When the arc length stabilizer was deactivated, the arc length was unstable and too short. The droplet transfer mode was mainly short circuit partial transfer, with only a small part of the droplet transferred into the molten pool, with the characteristics of no obvious necking, a few spatters, small droplet impact, long short circuit duration and high short-circuit current. There was also a small proportion of short circuit complete transfer with obvious necking, larger droplet impact, shorter short-circuit duration and lower short-circuit current. With arc length stabilizer, droplet transfer modes were short circuit complete transfer and spray transfer. The spray transfer had the largest droplet impact, no short circuit and no spatter. With the arc length stabilizer activated, a deep penetration, a high penetration ratio, a small reinforcement and a large reinforcement factor were acquired. This provides an innovative method to solve the difficulties of droplet transfer and molten pool spreading and eliminate the incomplete fusion in the GMAW of 9%Ni steel with nickel-based alloy welding wire.

Arc Behavior and Droplet Transfer Analysis in AC-P-MIG Welding of Aluminum Alloys

Study on Arc Behavior and Droplet Transfer in Twin-Electrode TIG-MIG Indirect Arc Welding

Arc Properties and Droplet Transfer Characteristics in Cable-Type Welding Wire Electrogas Welding

Phenomena of wire melting and bead formation in AC pulse MIG welding of aluminum alloy

Droplet transition for plasma-MIG welding on aluminium alloys

The Arc Stability and Droplet Transfer Characteristics of an Alternating Current Heterogeneous Twin-Wire Indirect Arc Welding

Droplet detachment and motion behaviors in laser-MIG hybrid welding of aluminum alloy

Arc and Droplet Behaviors in Horizontal Short-Arc Pulsed Gas Metal Arc Welding of 9%ni Steel with ERNiCrMo-3 Welding Wire

Study on Arc Behavior and Weld Formation of Magnetically Controlled Narrow Gap TIG Welding

Arc Profile Characteristics of Al Alloy in Double-Pulsed GMAW

Effect of Main Arc Voltage on Arc Behavior and Droplet Transfer in Tri-Arc Twin Wire Welding

Behavior and Stability of Droplet Transfer under Laser-Mig Hybrid Welding with Synchronized Pulse Modulations

The study on plasma-Mig hybrid arc behaviour and droplet transfer for mild steel welding

Metal Transfer and Arc Behaviour of Novel Consumable and Non-Consumable Electrode Indirect Arc Droplet Welding

Droplet transfer characteristics in high-power laser–MAG hybrid welding: Influence of energy parameters

Metal Transfer Behavior in AA6061 Aluminum Alloy Double-Wire Median Pulsed Gas Metal Arc Welding

Influence of high-frequency pulse on droplet transfer process and weld formation in double-wire median pulsed GMAW of aluminum alloy

Effects of Arc Bubble Behaviors and Characteristics on Droplet Transfer in Underwater Wet Welding Using In-Situ Imaging Method

Arc characteristic in aluminum alloy double-wire variable polarity double base pulsed gas metal arc welding

Test and Analysis of High-Speed Photography and Electric Signals of Droplet Transfer in Arc Welding

Comparative Study of Droplet Transfer Modes on Appearance, Microstructure, and Mechanical Properties of Weld During Pulsed GMAW