Abstract:Square wave alternating current (AC) tungsten inert gas (TIG) welding possesses great advantages in welding stability, quality, flexibility, and cost in manufacturing thin-walled propellant storage tanks with 2219-T6 aluminum alloy. To solve the welding engineering problem of 4 mm-thick plates made by square wave AC TIG welding, we conducted process optimization experiments and performed common microstructure analysis and mechanical property testing. Tensile strength and microhardness reaching 63.8 and 83.1% of the base material appear in the optimal weld. The dendrite morphology, grain size, and eutectic content of all welds were compared and analyzed with optical microscopic observation, image segmentation, and grayscale statistics. The obtained quantitative results interpret the macroscopic properties of the optimal weld from a microscopic perspective. Shallow and uniform equiaxed dimples, evident tearing ridges, and second-phase particles were detected in the tensile fractures. Reticular, granular, and lath eutectic ( α (Al) + CuAl 2 ) were found in the interior and boundaries of dendritic solid solution ( α (Al)). Unexpectedly, the epitaxial growth of the columnar grains was inconspicuous or absent in all welds. Uniform and fine equiaxed grains occupy almost all welds of different process parameters, while the G/R ratio of these welds reaches 15-23 °C·s/mm^2, under which the equiaxed crystals should not have formed. We attributed the grain refinement in these welds to the secondary phase particles in base metal. They are broken into fragments during the multi-pass rolling process of plates, remain semi-dissolved under a fast cooling rate, and provide adequate heterogeneous nuclei for melt solidification. A further SEM and EDS test to base metal and secondary phase particles confirmed our findings and speculations. These results suggest that in the molten pool with sufficient heterogeneous nucleation, the mechanical blocking effect of heterogeneous nucleation may interfere with the thermodynamic effect of welding heat input and speed on grain structure.

The Arc Stability and Droplet Transfer Characteristics of an Alternating Current Heterogeneous Twin-Wire Indirect Arc Welding

Impact of Process Parameters on Forming Quality and Deposition Efficiency of Unsupported Rods in Wire Arc Additive Manufacturing

Investigation of Arc Stability in Wire Arc Additive Manufacturing of 2319 Aluminum Alloy

Arc Behavior and Droplet Transfer Analysis in AC-P-MIG Welding of Aluminum Alloys

Research on suppression of cross coupled arc oscillation behavior

Analysis of arc interference and welding stability in twin wire GMA welding

Research on Arc Interference and Welding Operating Point Change of Twin Wire MIG Welding

Forming characteristic analysis in twin tungsten electrode – wire electrode indirect arc based additive manufacturing

Metal Transfer and Arc Behaviour of Novel Consumable and Non-Consumable Electrode Indirect Arc Droplet Welding

Effect of droplet transfer mode on composition homogeneity of twin-wire plasma arc additively manufactured titanium aluminide

Numerical Simulation of Arc Characteristics and Multi-Layer Deposition of Cu Alloys Fabricated by Wire Arc Additive Manufacturing

Simulation and control of metal droplet transfer in bypass coupling wire arc additive manufacturing

Numerical Analysis of Arc Physics and Energy Transfer under Circumferential Gas Constraint Effect

Height Stability Control of CuCrZr Alloy Based on Forming Characteristics and Droplet Transfer Behaviors in Wire Arc Additive Manufacturing

Study on Coupling Mechanism and Metal Transfer in Laser Double-Wire MIG Arc Hybrid Welding

Study on Arc Behavior and Weld Formation of Magnetically Controlled Narrow Gap TIG Welding

Thermal Behavior in Wire Arc Additive Manufacturing: Characteristics, Effects and Control

Experimental Study on Wire Melting Control Ability of Twin-Body Plasma Arc

The study on plasma-Mig hybrid arc behaviour and droplet transfer for mild steel welding

Research Status of Stability in Dynamic Process of Laser-Arc Hybrid Welding Based on Droplet Transfer Behavior: A Review

Research on Microstructure and Mechanical Properties of Square Wave Alternating Current Tungsten Inert Gas Welded Joints in 2219-T6 Aluminum Alloy