Abstract:An experimental system to photograph molten droplet images by using a high-speed charge coupled device camera and to record welding current and arc voltage in phase was established.After the definition of molten droplet size in short-circuit transfer mode was given and the analysis system for molten droplet size and arc signals based on MATLAB platform was introduced,the characteristic of molten droplet size in short-circuit CO_2 arc welding using the power supply with constant voltage output,the relationship between the molten droplet size and the welding process behavior were investigated.The experimental results show that the molten droplet size presents normal distribution between 1 and 2 times of wire electrode diameter.The excessive large or small size in molten droplet are all unfavorable to the stability of welding process in short-circuit transfer mode.According to the formation and transfer course of molten droplet,the main influence factors to the molten droplet size are analyzed and the approaches to control the droplet size are proposed.Namely,the random characteristic of the residual liquid metal quantity at the end of wire electrode after the completion of short-circuit transfer and the arc energy induces the uncertainty of molten droplet size.(making effective control on them will increase the accordance of molten droplet size and short-circuit transfer procedure,and improve the process behavior and welding quality of short-circuit CO_2 arc welding further.)

Test and Analysis of High-Speed Photography and Electric Signals of Droplet Transfer in Arc Welding

Detect and Analysis of Molten Droplet in Short-Circuit Arc Welding Based on High-Speed Charge Coupled Device Camera

Modeling of Droplet Transfer Electrical Characteristics in Pulsed Gas Melted Arc Welding

Research on Droplet Size of Short-Circuiting Transfer in CO2 Gas-Shielded Arc Welding Based on High-Speed Photography

Metal transfer electrical characteristics and its analysis in pulsed current gas metal arc welding

Modeling and analysis of droplet forming in gas metal arc welding short circuiting transfer

The study on plasma-Mig hybrid arc behaviour and droplet transfer for mild steel welding

Arc Behavior and Droplet Transfer Analysis in AC-P-MIG Welding of Aluminum Alloys

An Image-Processing Method for Extracting Kinematic Characteristics of Droplets During Pulsed GMAW

Study on the Effect of Pulse Waveform Parameters on Droplet Transition, Dynamic Behavior of Weld Pool, and Weld Microstructure in P-GMAW

Synchronizing Multi-data Acquisition and Analysis System for Gas Melted Arc Welding-Pulse

Arc Properties and Droplet Transfer Characteristics in Cable-Type Welding Wire Electrogas Welding

Control Of Droplet Transition In Underwater Welding Using Pulsating Wire Feeding

Numerical Simulation and Experimental Verification of Droplet Transfer During Local Dry Underwater MIG Welding Process of SUS304

Dynamic control of current and voltage waveforms and droplet transfer for ultrasonic-wave-assisted underwater wet welding

Research on Arc Interference and Welding Operating Point Change of Twin Wire MIG Welding

Measurement and calculation of plasma drag force in arc welding based on high-speed photography technology and particle dynamics

Investigation on droplet transfer behavior during fiber laser-flux cored arc hybrid welding

Effects of Arc Bubble Behaviors and Characteristics on Droplet Transfer in Underwater Wet Welding Using In-Situ Imaging Method

A Real-Time Monitoring Method for Droplet Transfer Frequency in Wire-Filled GTAW Based on Arc Sensing

Random Nature of Droplet Size and Its Origins in Short Circuit Co2 Arc Welding