Abstract:Abstract Online monitoring of the welding process is very important to the development of the modern manufacturing industry. However, monitoring welding defects in real-time and with high accuracy is challenging because welding is inherently a dynamic, non-linear process. In this paper, the forming defects generated during the melt Inert-gas welding of sheet steel as the object of research. We propose a multi-task simultaneous monitoring system for welding defects based on the YOLOv5 model, which can achieve highly accurate simultaneous detection of burn-through and weld deviation defects. Firstly, a passive vision system has been designed that can filter out strong arc light interference. In combination with a self-made camera bracket with flexible adjustment and repeatable positioning, clear images of the molten pool can be acquired. Compared to common methods that require a laser for weld deviation detection, all monitoring tasks can be performed with just one charge coupled device camera, significantly reducing the cost of deploying the system. Secondly, to obtain experimental data closer to the industrial field environment. We simulated different degrees of local and continuous burn-through by changing three parameters: welding current, plate thickness, and lap width. Four different deviations: left, right, and tilt were designed to obtain rich weld deviation image data. Finally, based on the above data, we compared several aspects such as detection speed, recognition accuracy, and loss function. The YOLOv5s model with the smallest model parameters was finally selected as the base model. The results show that our proposed multi-task simultaneous monitoring system achieves an average accuracy of 98.84% for the identification of four molten pool states. Burn-through defect and weld deviation detection with more than 50 frames per second can be achieved in the online detection state. This paper can provide some guidance for the online monitoring of the welding manufacturing process.

Synchronizing Multi-data Acquisition and Analysis System for Gas Melted Arc Welding-Pulse

Modeling of Droplet Transfer Electrical Characteristics in Pulsed Gas Melted Arc Welding

Development of the welding measurement and control system based on LabVIEW

Metal transfer electrical characteristics and its analysis in pulsed current gas metal arc welding

An Image-Processing Method for Extracting Kinematic Characteristics of Droplets During Pulsed GMAW

A System of Welding Parameter Collection and Analysis Based on LabView VI

System Based on the LabVIEW for Assessing the Stability of GMAW-P Welding Process

Investigation on Surface Forming and Stability of Laser+Pulse Melting Gas Metal Arc Hybrid Welding

Variable Polarity TIG Welding Arc Dynamic Analyzer

Monitoring and processing of weld pool images in pulsed gas metal arc welding

Research on Measurement of Pulsed-Gtaw Process by Multiple Sensors

Simulation research on the VP PMIG welding power source-arc system

Dynamic monitoring of weld pool image for pulsed GTAW in welding scene

New close-loop droplet transfer control system in the pulsed GMAW

Vision sensing system and detection of backside image of molten pool in laser-MIG hybrid welding

Online identification of burn-through and weld deviation in sheet lap MIG welding based on YOLOv5

Study on the Effect of Pulse Waveform Parameters on Droplet Transition, Dynamic Behavior of Weld Pool, and Weld Microstructure in P-GMAW

Modeling and analysis of droplet forming in gas metal arc welding short circuiting transfer

Dynamic Interaction Behavior Of Pulse Gmaw

Measurement and estimation of weld pool surface depth and weld penetration in pulsed gas metal arc welding

Integrated Weld Quality Control System Based on Laser Strobe Vision