Abstract:A set of six-degree-of-freedom robotic welding automatic tracking platform was designed in this study to realize the real-time tracking of weld seams. Moreover, the feature point tracking method and the adaptive fuzzy control algorithm in the welding process were studied and analyzed. A laser vision sensor and its measuring principle were designed and studied, respectively. Before welding, the initial coordinate values of the feature points were obtained using morphological methods. After welding, the target tracking method based on Gaussian kernel was used to extract the real-time feature points of the weld. An adaptive fuzzy controller was designed to input the deviation value of the feature points and the change rate of the deviation into the controller. The quantization factors, scale factor, and weight function were adjusted in real time. The input and output domains, fuzzy rules, and membership functions were constantly updated to generate a series of smooth bias robot voltage. Three groups of experiments were conducted on different types of curve welds in a strong arc and splash noise environment using the welding current of 120 A short-circuit Metal Active Gas (MAG) Arc Welding. The tracking error was less than 0.32 mm and the sensor's metrical frequency can be up to 20 Hz. The end of the torch run smooth during welding. Weld trajectory can be tracked accurately, thereby satisfying the requirements of welding applications. (C) 2018 Elsevier Ltd. All rights reserved.

Development of the welding measurement and control system based on LabVIEW

Research on Seam Tracking System of NG-GTAW by LabVIEW

Synchronizing Multi-data Acquisition and Analysis System for Gas Melted Arc Welding-Pulse

A Digital Control for Swinging Arc Narrow Gap MAG Welding System

Test and Analysis System Research for Arc Welding Process Based on Electrical Signals and High-Speed Photography

Design and implementation date acquisition system of by-pass coupled arc MIG welding

MEASUREMENT SYSTEM AND APPLICATION OF THE DEFORMATION BASED ON LabVIEW

Design and Implementation of Four-Channel Welding Arc Dynamic Wavelet Analyzer

Development of CO Laser Control System Based on LabVIEW

Real-Time Automatic Detecting System and Online Monitoring Software in Mash Seam Welder

On-line Monitoring System with Remote Access Function for Grouping Welding Processes Based on LabVIEW

Design of multi-sensor on-line monitoring system for laser welding

Data Acquisition and Analysis System for Ultrasonic Metal Welding

Design of an Automatic Control System for Magnetic Controlled Narrow-Gap TIG Arc Welding of Thick Plates

A System of Welding Parameter Collection and Analysis Based on LabView VI

Design and implementation of a linear friction welding machine control system based on labview

Seam Tracking and Dynamic Process Control for High Precision Arc Welding

Welding Seam Tracking in Robotic Gas Metal Arc Welding

Development of an Ethernet-based data acquisition system of resistance spot welding for white-body assembly

Real-time Seam Tracking Control System Based on Line Laser Visions

Control System Designed for All Position Pipe Welding Device