Abstract:In this study, the quantitative results from both electron backscattered diffraction and transmission electron microscope analyses provided the fundamental insight into the recrystallized behavior and precipitation reaction of the in-situ nano TiB2/AlCuMg composite during heat treatment. The difference of coefficient thermal expansion between TiB2 particles and Al matrix enabled the formation of deformation zone around TiB2 clusters during water quenching which promoted the recrystallized behavior. Besides, the strong pinning effect induced by TiB2 distributed at recrystallized grain boundary was also observed. As a result, the fine recrystallized grains were generally distributed around particle clusters. During artificial aging process, the trace Mg remarkably enhanced the kinetics of precipitation reaction in the composite. The coexistence of θ″ and θ' precipitates confirmed the continuous transformation of θ″ into θ' via the atomic Cu rearrangement. Herein, the θ'/Al interface acted as a heterogeneous nucleation site of the Al3Zr precipitate was able to improve the nucleation and growth rate of the precipitate. Moreover, the misfit dislocations at TiB2/Al interface with larger lattice mismatch were confirmed. The synergistic effect of stress field caused by misfit dislocations and geometrically necessary dislocations facilitated the pipe diffusion was responsible for transporting solute atoms under depleted vacancy and solute atoms around the interface, benefited to the nucleation and growth of precipitates.

Epitaxial dependence of the melting behavior of In nanoparticles embedded in Al matrices

Melting and freezing behavior of embedded nanoparticles in ball-milled Al–10 wt% M (M=In, Sn, Bi, Cd, Pb) mixtures

Melting of embedded Pb nanoparticles monitored using high-temperature in situ XRD

Superheating and Melting-Point Depression of Pb Nanoparticles Embedded in Al Matrices

Melting temperature of In particles embedded in an Al matrix

Evolution from Amorphous to Nanocrystalline and Corresponding Magnetic Properties of Fe-Si-B-Cu-Nb Alloys by Melt Spinning and Spark Plasma Sintering

Crystallization kinetics and magnetic properties of Fe 63.5Co10Si13.5B9Cu 1Nb3 nanocrystalline powder cores

Crystallization Kinetics and Magnetic Properties of Fe73.5si13.5b9cu1nb1v2 Nanocrystalline Powder Cores

Melting, Superheating and Freezing Behaviour of Indium Interpreted Using A Nucleation-And-Growth Model

Dynamic mechanical analyzer study on surface melting of indium nanoparticles

The Al Doping Effect on Epitaxial (In,Mn)As Dilute Magnetic Semiconductors Prepared by Ion Implantation and Pulsed Laser Melting

Determination of Pressure Effect on the Melting Point Elevation of Al Nanoparticles Encapsulated in Al2o3 Without Epitaxial Interface

The Influence of Nanoparticles on Dendritic Grain Growth in Mg Alloys

Pressure-induced Superheating of Al Nanoparticles Encapsulated in Al2O3 Shells Without Epitaxial Interface

Thermal Stability of Nanocrystalline Intermetallic Compound CuAl2-Al Particulate Composite

Molecular-Beam Epitaxy of Alinn: an Effect of Source Flux and Temperature on Indium Atom Incorporation in Alloys

Microstructure and magnetic properties of nanocrystalline Co-doped Sendust alloys prepared by melt spinning

Insight into the recrystallization behavior and precipitation reaction of in-situ nano TiB2/Al Cu Mg composite during heat treatment

Microstructure and Melting Behavior of Tin Nanoparticles Embedded in Alumina Matrix Processed by Ball Milling

Superheating of Ag Nanoparticles Embedded in Ni Matrix

High Thermal Stability of Nanostructured Al Mediated by Heterophase Interfaces and Nanotwinning