Abstract:High‐resolution electron microscopy was employed to characterize the interface structure of a cast Al‐Mg‐Si‐Bi‐Pb aluminium(6262)‐based composite reinforced by α alumina particles with a trace of β alumina in order to investigate the behaviour of alloying elements in cast composites. Except for a few primary Mg2Si particles, few reaction products were detected at the interface of Al/α‐Al2O3 due to the unfavourable reaction kinetics during the squeeze‐casting process. The Mg2Si particle has an orientation relationship with α‐Al2O3 of [011]Mg2Si//[1210]α‐Al2O3 (111)Mg2Si//(0006)α‐Al2O3. A significant amount of MgAl2O4 was found on the surface of the β‐Al2O3 particles, which is in contrast to the small degree of reaction found on α‐Al2O3 particles. MgAl2O4 and β‐Al2O3 particles have the following orientation relationship: [011]MgAl2O4//[1210]β‐Al2O3 (111) MgAl2O4//(0006)β‐Al2O3. The similar crystal structure of β‐Al2O3 to MgAl2O4 favours MgAl2O4 nucleation and growth on the surface of β‐Al2O3. Interfacial energy minimization dominates the atomic structure of the interface with the result that close packed planes and directions in the Al2O3 reinforcement and reaction products are parallel to the interfaces. Bi and Pb were found in the form of metallic nanometre particles between Al2O3 particles, or between the MgAl2O4 and Al2O3 particles, or in the open channels of β‐Al2O3 filled by the Al matrix.

Superheating and Melting-Point Depression of Pb Nanoparticles Embedded in Al Matrices

Melting of embedded Pb nanoparticles monitored using high-temperature in situ XRD

Reduced lattice thermal conductivity in nanograined Na-doped PbTe alloys by ball milling and semisolid powder processing

Epitaxial dependence of the melting behavior of In nanoparticles embedded in Al matrices

Melting and freezing behavior of embedded nanoparticles in ball-milled Al–10 wt% M (M=In, Sn, Bi, Cd, Pb) mixtures

Influence of Pb doping on superconductivity of α-BiPd and β-Bi2Pd alloys

High-Resolution Electron Microscope Observation of Interface Microstructure of A Cast Al-Mg-Si-Bi-Pb(6262)/Al2o3p Composite

Internal friction associated with the melting of Pb nanoparticles in an Al matrix

Synthesis of Sn Nanoparticles and Their Size Effect on the Melting Point

Melting of Pb Clusters Without Free Surfaces

Heterogeneous Coarsening of Pb Phase and the Effect of Cu Addition on It in a Nanophase Composite of Al–10wt%Pb Alloy Prepared by Mechanical Alloying

Melting of Pb thin film confined in Al matrix

Microstructure and Morphology of Al-Pb Bearing Alloy Synthesized by Mechanical Alloying and Hot Extrusion

Two Stage Formation of Silver Nanoparticles in PZT Thin Films Controlled by Re-Nucleation Through Transition Phase of Ag-Pb Alloy

Study on the nano-crystalline and amorphous Al-Pb series powders synthesized by mechanical alloying

Synthesized by Ball Milling Al-Pb-Si-Sn-Cu Nanocrystalline Powder

Microstructure and Melting Behavior of Tin Nanoparticles Embedded in Alumina Matrix Processed by Ball Milling

Study on Phase Transformation and Thermodynamic and Kinetic of Al-Pb Powder During Mechanical Alloying

Evolution from Amorphous to Nanocrystalline and Corresponding Magnetic Properties of Fe-Si-B-Cu-Nb Alloys by Melt Spinning and Spark Plasma Sintering

Formation of nanocrystalline and amorphous phase of Al-Pb-Si-Sn-Cu powder during mechanical alloying

Melting point depression of tin nanoparticles embedded in a stable alpha-alumina matrix fabricated by ball milling