Abstract:Possible lamellar coarsening in the as-cast microstructure of TiAl alloys significantly affects the subsequent processing of ingot metallurgy, and a systematic study of it is necessary. In this paper, two TiAl alloys with different solidification modes (TNM-45Al alloy and TNM-0.3Si-0.7 C alloy) were obtained by compositional minor adjustment basing on TNM alloy. The effect of different adjustment routes on the localized lamellar structure coarseing behaviour and the resulting differences in the uniformity of the nanohardness distribution were investigated by comparing with TNM alloy. It is found that increasing the Al content of the TNM alloy while keeping the solidification mode as β-solidification unchanged leads to severe localised lamellar coarsening in the S-segregation zone of TNM-45Al alloy, including continuous coarsening (CC) and discontinuous coarsening (DC). In contrast, the solidification mode of the TNM-0.3Si-0.7 C alloy with the addition of the strong α stabilizer elements Si and C is transformed into hypoperitectic solidification with severe peritectic segregation, but the lamellar structure exhibits surprising full-domain stability. The results show that the thermodynamic tendency caused by high Al content and the absence of net-like β-segregation leads to severe localised lamellar coarsening in TNM-45Al alloy. CC can be accomplished through the migration of interface defects. DC is formed by the nucleation and expansion of γ-phase Shockley incomplete dislocations, and the interfaces consist of the α 2 /γ interface and the first discovered γ /γ twin interface. The lamellar coarsening of TNM-0.3Si-0.7 C alloy can be effectively suppressed by the solid solution of Si/C atoms and the near net-like β-segregation in the primary β-phase region. As a result, the distribution uniformity of the nanohardness of the lamellar structure in TNM-0.3Si-0.7 C alloy is excellent, with the variance decreasing from ±0.24 of TNM alloy to ±0.20, while it increases to ±0.37 for the TNM-45Al alloy.

Uncovering the role of nanoscale Si particles on the thermal stability of a lamellar-nanostructured Al–1%Si alloy

Thermal stability and its effects on the mechanical properties of rapidly solidified Al-Ti alloys

Phase stability and the interface structure of a nanoscale Si crystallite in Al-based alloys

Unveiling the Fine Microstructure of Nanoscale Composite Particles Embedded in Brittle Si Phase in an Al-Si-Cu-Mg Alloy

The Effect of Solution Treatment on the Si Particles’ Morphology Evolution and the Thermal Conductivity and Tensile Properties of Sb-Modified Al-8Si-0.6Mg Alloys

The coarsening of silicon particles in a submicron-grained layer-deposited Al-12wt% Si alloy

Origin of the Separated Α-Al Nanocrystallization with Si Added to Al86Ni9La5 Amorphous Alloy

Thermal Stability and Crystallization Behavior of Al86Ni9Y5 Amorphous Alloys with Different Si Addition

Engulfment and distribution of second-phase nanoparticle during dendrite solidification of an Al–Si binary alloy: a simulation study

Investigation of the Interface Precipitation on Α-Al(fe,mn)si Particles in Al–Fe–Mn–Si–Mg–Cu Alloy

Coarsening Characteristic of Si Particles in Powders of Rapidly Solidified Al-Si Alloy

Atomistic Simulations of Dislocation Activity in Si Nanofibers in Al-Si Eutectics

Investigating the thermal stability of nanocrystalline aluminum-lithium alloy by combining different mechanisms: Reinforcing with graphene and alloying with Sr

Understanding the role of Ca segregation on thermal stability, electrical resistivity and mechanical strength of nanostructured aluminum

Thermal Stability of Nanocrystalline Intermetallic Compound CuAl2-Al Particulate Composite

Effect of Si-addition on structure and thermal stability of Ti-Al-N coatings

Effect of compositional minor adjustment on localized lamellar structure coarsening of TiAl alloys with different solidification modes

Microstructure Evolution in TiAl Alloyed with Si

Intermetallic particle heterogeneity controls shear localization in high-strength nanostructured Al alloys

Effect of nano-TiB2 particles on the anisotropy in an AlSi10Mg alloy processed by selective laser melting

Effect of Nano- and Submicron SiC on the α-Al Dendrite Size and Mechanical Strength of SiC/A356 Composites