Abstract:Aluminum metal matrix composites (Al-MMCs) have become attractive for engineering structural applications due to their excellent properties and are increasingly seen as alternative to the conventional monolithic materials particularly in the automotive, aerospace and defence industries. In this study, Al-4043/Ni-coated SiC composite was developed via stir casting process and the mechanical properties of the composites investigated. The composites were produced with varying SiC reinforcement fraction between 5-25 wt%. The microstructure of the composites was characterized using optical microscope and tensile properties of the composite with the monolithic Al-4043 alloy were assessed using a universal testing machine. The composite hardness was assessed using a Brinell hardness testing machine, energy required to break the composite was assessed using Charpy impact testing machine and the wear rate of the composites were evaluated using a Rubin Disc machine. The composites were characterized to possess Al-SiC eutectic microstructure with SiC solid solution precipitates and SiC particles uniformly distributed in the Al matrix. The density of the composites was found to linearly increase with increasing SiC reinforcement fractions. The tensile strength, yield strength and elastic modulus were found to increase with increasing SiC reinforcement fraction and highest values obtained for composite with 25 wt% SiC were 350 MPa, 254 MPa and 13.4 GPa respectively. However, the elongation of the composite with the highest reinforcement was lowest at a value of 10%. The hardness, compressive strength and impact energy of the composites increased significantly as composite with 25 wt% SiC possessed 76 HB, 184 MPa and 48 J respectively. The wear resistance of the Al-4043/SiC composites with highest SiC reinforcement was found to be eleven times that of the monolithic Al-4043 alloy.

Mechanical Properties of SiC/Gr/Al Composites Fabricated by Squeeze Casting Technology

The Mechanical Properties of Co-Continuous Si3N4/Al Composites Manufactured by Squeeze Casting

The thermal expansion and mechanical properties of high reinforcement content SiCp/Al composites fabricated by squeeze casting technology

Microstructure and Mechanical Properties of Cf+SiC/Al Composites Fabricated by Squeeze Cast

MICROSTRUCTURE AND PROPERTIES OF DEFORMABLE SiCP/Al COMPOSITE FABRICATED BY SQUEEZE CASTING METHOD

Study of properties research on instrument grade SiC/Gr/Al composites

Squeeze casting technique for fabricating SiCp/Al composites with lower volume fractions of SiC particles

Mechanical Property and Machinability of SiCp/Gr/2024Al Composite

Fabrication and mechanical properties of high-volume-fraction Si 3 N 4 -Al-based composites by squeeze infiltration casting

Fabrication and Property of SiCp/Al Composites with High Content of SiCp

Properties of Hybrid-Reinforced Aluminum Matrix Composites for Precision Instruments

Effect of Graphite Particle Reinforcement on Dry Sliding Wear of SiC/Gr/Al Composites

MICROSTRUCTURE AND PROPERTIES OF DEFORMABLE SiC_P/Al COMPOSITE FABRICATED BY SQUEEZE CASTING METHOD

Mechanical Properties of Aluminum-4043/Nickel-coated Silicon Carbide Composites Produced via Stir Casting

Mechanical Properties of Interpenetrating Graphite/2024Al Composites Produced by Improved Squeeze Exhaust Casting

Microstructure and damping behavior of SiCp/Gr/2024Al metal matrix composites by squeeze casting technology

Sicp/Al Composites Fabricated by Modified Squeeze Casting Technique

Processing, Microstructure and Mechanical Properties of SiCp/AZ91 Mg Matrix Composites Fabricated by Squeeze Casting

Hot Extrusion and Its Effect on Microstructure and Properties of Squeeze Casting Sicp/Al Composites with Lower Volume Fraction of Reinforcement

Thermal physical properties of squeeze casting SiCw/Al composite

Study of Machinable SiC/Gr/Al Composites