Abstract:In this study, Spark Plasma Sintering (SPS) was utilized to fabricate fine-grained cemented carbides, and an orthogonal experimental design was employed to examine the influence of holding temperature (1100 °C, 1200 °C, 1300 °C) and holding time (5, 10, and 15 min) on the performance of WC-10Co cemented carbide specimens. Compared with conventional sintering methods, this work achieved the production of samples with enhanced overall performance at lower temperatures and shorter durations. Specifically, under the conditions of a holding temperature of 1300 °C and a holding time of 5 min, the resulting specimens exhibited a density of 14.64 g/cm3, a hardness of 91.29 HRA, a fracture toughness of 16.39 MPa·m½, and a transverse rupture strength of 2398 MPa. The microstructural analysis revealed that as the holding temperature increased, the Co phase in the specimens underwent a transformation from its initial powder form to banded cobalt and subsequently to slit-shaped cobalt. It was found that the presence of banded cobalt effectively hinders crack propagation, whereas slit-shaped cobalt is more effective in preventing crack initiation, thus impacting the overall performance of the specimens. By analyzing the sintering curves and microstructures, the densification mechanisms during SPS sintering of WC-Co cemented carbides were elucidated. The study concluded that the state changes of the Co phase play a significant role in the densification behavior, final microstructure, and properties of the sintered material. These findings offer valuable insights for understanding and optimizing the SPS process.

Synthesis and Characterization of Ultrafine WC–Co by Freeze-Drying and Spark Plasma Sintering

Ultra-fine Grain Cemented Carbide Fabricated from WC-Co Composite Powder by In-situ Synthesis

Spark Plasma Sintering of Ultrafine WC-5%Co Cemented Carbide Composite Powders

Synthesis of WC-Co Composite Powder by Reduction and Carbonization Reactions and Its Densification

Rapid synthesis of ultrafine WC-Co cemented carbides by in-situ reactions and spark plasma sintering

Synthesis of WC Composite Powder with Nano-Cobalt Coatings and Its Application in WC-4Co Cemented Carbide

Fabrication of ultrafine WC-based cemented carbide by spark plasma sintering

Preparation of WC-Co Cemented Carbide by Spark Plasma Sintering: Microstructure Evolution, Mechanical Properties and Densification Mechanism

Preparation of Ultra-Fine WC-Co Cermet and Its Wear Behavior

Effects of ultrafine WC on the densification behavior and microstructural evolution of coarse-grained WC-5Co cemented carbides

Preparation of low binder WC-Co-Ni cemented carbides with fine WC grains and homogeneous distribution of Co/Ni

Research on Nano-Grained Cemented Carbide Prepared by Spark Plasma Sintering

Microstructures and Properties of Ultrafine Pure WC Sintered by Spark Plasma Sintering Method

Microstructures and properties of WC-20Co-1Y 2 O 3 cemented carbide by hot-press and liquid phase sintering

Spark Plasma Sintering Of Nanocrystalline Wc/Co Cemented Carbides

Ultra-Coarse Grain Wc-Co Cemented Carbide From Chemical Coated Powder By One-Step Hydrogen Reduction

Ultrafine WC-10Co cemented carbides fabricated by electric-discharge compaction

Ultrafine grained WC-10FeCoCu cemented carbides doped with La 2 O 3 prepared by spark plasma sintering

In-situ synthesis of WC–Co composite powder and densification by sinter-HIP

Preparation and Properties of WC-10％ Co Cemented Carbides with Flatter Shape of WC Grains

Low temperature pressureless immediate sintering of novel nanostructured WC/Co/NiCrSiB-alloy cemented carbide