Abstract:The refractive index of silicon-based waveguide materials is highly sensitive to temperature and stress, and the effective refractive index of the waveguide varies with temperature changes. Thus, it is critical to reduce the temperature dependence of Arrayed Waveguide Grating (AWG) devices and to precisely control the center wavelength of AWGs. In this study, the thermoelectric cooler (TEC) was designed and fabricated to control the temperature of the thermal AWG chip, which did not require any material replacement or reprocessing of the AWG chip. Different magnitudes and polarities of voltage are applied to the TEC to regulate its operational state (heating or cooling). A multiphysics simulation model of a thermal AWG device is established and validated through transient and steady-state experiments. This study investigated the influence of different conditions (input voltage, environmental temperature) on the temperature and maximum stress of the AWG chip. A conformal TEC was designed and its performance was compared with that of the square TEC. The energy consumption of the conformal TEC was also tested and analyzed. The results show that in a 25 °C ambient environment, the TEC can control the temperature of the AWG chip in the range of 1.5–78.3 °C, significantly expanding the current operational temperature range of 65.0–85.0 °C when using Positive Temperature Coefficient (PTC) heaters. Under the same conditions, when using the conformal TEC as the temperature control device, the temperature gradient on the AWG chip is reduced by 1.37 °C during cooling and 2.80 °C during heating. The maximum stress value in the core layer is always lower, with a maximum reduction of 3.61 MPa. TEC can set the ideal operating temperature of the AWG chip according to the actual operating environment of the product, which reduces the energy consumption of TEC. A comparison is made between the average power consumption of the conformal TEC and the PTC heater under two operating conditions: a 25 °C constant-temperature environment and a natural environment. The average power consumption can be reduced by up to 97.87 % and 93.02 %, respectively. This study holds significant guidance for solving the temperature dependence problem of AWG devices and the application of thermoelectric coolers in the field of optical communication.

Control Design of Surface Temperature Adaptive Material System

Design of Temperature Testing System in Multi-Parameter Combined Environmental Test

Experimental Study and Taguchi Analysis on LED Cooling by Thermoelectric Cooler Integrated with Microchannel Heat Sink

Design Optimization of Thermoelectric Cooling Systems for Applications in Electronic Devices

Self-adaptive Passive Temperature Management for Silicon Chips Based on Near-Field Thermal Radiation

The Design of Temperature Control System in Giant Magnetostrictive Actuator

Control Design of a Modular Current Source Power Conditioning System for High Temperature SMES

Design of Temperature Control System of Pico-Satellite MEMS Gyroscope

Phase Change Materials at the Cold/Hot Sides of Thermoelectric Cooler for Temperature Control

Design of a New Temperature Compensating System for High Power Circulator of EAST LHCD System

Outdoor adaptive temperature control based on a thermochromic hydrogel by regulating solar heating

Optimum Control Strategy and Performance Simulation of a Constant Temperature and Humidity Air-conditioning System

An experimental investigation and multiphysics simulation of thermoelectric temperature controller for AWG chips

A Kind Of Embedded Temperature Controller Based On Self-Turning Pid For Texturing Machine

The Design of Temperature Control System on Air-Condition Suit

Engineering Design of an Active–Passive Combined Thermal Control Technology for an Aerial Optoelectronic Platform

Design and thermal characteristic test of a temperature control system for spacecraft precision instrument

Experimental Investigation of Thermoelectric Heat Pump-Phase Change Material Thermal Control Systems

Liquid metal-based flexible and wearable thermoelectric cooling structure and cooling performance optimization

Thermal management of a flexible controlled thermoelectric energy conversion-utilization system using a multi-objective optimization

Vapor–Liquid Transition‐Based Broadband Light Modulation for Self‐Adaptive Thermal Management