Abstract:The development of wearable thermoelectric generators (w-TEGs) toward light weight, economy and high power generation performance can provide more opportunities for their application in self-powered wearable electronics. The existing w-TEGs lack insight into the physical parameter coupling between the substrate and TE legs, which leads to inefficient utilization of temperature difference and deterioration of power generation performance. In this work, the comprehensive thermal management for heat collector, TE legs and heat radiator is carried out by finite element simulation. It is found that increasing the thermal conductivity of the substrates for heat collection and dissipation is conducive to reducing the optimal fill factor and substrate thickness, and improving the power density, thus facilitating the w-TEG to be both comfortable to wear, economical, and functional. Specifically, a laminated film with good flexibility prepared from polyimide (PI) film and graphene assembly film (GAF) acts as the substrate of w-TEG. The PI film compensates and enhances the mechanical strength of the laminated substrate; the GAF with large thermal conductivity reduces the in-plane and out-of-plane thermal resistance of the laminated substrate, which contributes to the heat collection of the bottom substrate; and the GAF with high emissivity enhances the radiative heat transfer and facilitates the heat dissipation of the top substrate, which is cut into blocks without affecting the electrical path to ensure overall flexibility of the w-TEG. When the w-TEG with laminated substrate and fill factor of 10% (four w-TEG units connected in series, 20 × 145 mm2 in plane) is worn on the wrist for running (contact pressure: 0 KPa, wind speed: 3 ms-1), the optimal output voltage and power density reach 281.6 mV and 45.6 μWcm-2, respectively, which is one of the best results among the recently reported heatsink-less w-TEGs. This work provides guidance for optimizing the output performance of w-TEG and accelerate the development of self-powered electronics.

Liquid metal-based flexible and wearable thermoelectric cooling structure and cooling performance optimization

Flexible Bridged Thermoelectric Device with an Optimized Heatsink for Personal Thermal Management

Wearable Thermoelectric Cooler Based on a Two-Layer Hydrogel/Nickel Foam Heatsink with Two-Axis Flexibility

Advanced Thermoelectric Materials for Flexible Cooling Application

Flexible Thermoelectric Devices with Flexible Heatsinks of Phase-Change Materials and Stretchable Interconnectors of Semi-Liquid Metals

Functional Soft Composites As Thermal Protecting Substrates For Wearable Electronics

Wearable Thermoelectric Generator with Copper Foam As the Heat Sink for Body Heat Harvesting

Design and Fabrication of Wearable Thermoelectric Generator Device for Heat Harvesting

A self-healable, recyclable, and flexible thermoelectric device for wearable energy harvesting and personal thermal management

Structural Design for Wearable Self-Powered Thermoelectric Modules with Efficient Temperature Difference Utilization and High Normalized Maximum Power Density

Regulating Thermogalvanic Effect and Mechanical Robustness via Redox Ions for Flexible Quasi-Solid-State Thermocells

Realizing a 10 degrees C Cooling Effect in a Flexible Thermoelectric Cooler Using a Vortex Generator

Simultaneous Realization of Flexibility and Ultrahigh Normalized Power Density in a Heatsink-Free Thermoelectric Generator via Fine Thermal Regulation

Realizing a 10°C Cooling Effect in a Flexible Thermoelectric Cooler using a Vortex Generator

Optimized thermal design for excellent wearable thermoelectric generator

Scalable manufacturing durable, tailorable and recyclable multifunctional woven thermoelectric textile system

Liquid Metal Supercooling for Low‐Temperature Thermoelectric Wearables

Long-Lasting Heat Dissipation of Flexible Heat Sinks for Wearable Thermoelectric Devices

A Liquid Metal-Enhanced Wearable Thermoelectric Generator

Soft and Stretchable Thermoelectric Generators Enabled by Liquid Metal Elastomer Composites

High-Performance Wearable Bi2Te3-Based Thermoelectric Generator