Abstract:Thermal management of equipment in confined spaces is of great importance for the safe operation of equipment. Solid-liquid phase change materials (PCM) can be applied to the thermal management of intermittent electronic equipment because of their large isothermal latent heat absorption capacity. In this paper, experimental and numerical research on the thermal performance of an intermittent rectangular cavity plate fin PCM-based heat sink is carried out, which can be applied to heat dissipation in narrow spaces with high heat flow. The optimal PCM-based heat sink structure is obtained by numerical simulation based on the Taguchi method, and the enthalpy method is used to model the phase change process. Temperature testing and visualization experiments are used to visually present the PCM-based heat sink's internal temperature distribution and validate the numerical model. The effects of fin structure parameters, heating power, cooling air speed and number of intermittent cycles on thermal performance (base temperature, liquid fraction and operating time) are analyzed for different structured PCM-based heat sinks. The results show that the PCM-based heat sink with 8 fins, 15 mm fin height and 2 mm fin thickness has the longest stage C at the critical base temperature of 348 K and reaches the maximum operating time of 1193 s during the charging cycle. The natural convection in stage C of the charging cycle plays a crucial role in prolonging the operating time. Meanwhile, increasing the number of intermittent cycles can result in longer operating time and lower critical base temperature. As the number of intermittent cycles increases from 1 to 8, the temperature difference between the maximum and minimum temperature of the base during the whole cycle is reduced from 48 K to 25 K, and the temperature fluctuations gradually decrease.

Experimental Investigation of Thermoelectric Heat Pump-Phase Change Material Thermal Control Systems

Thermal conductivity enhancement of phase change materials for thermal energy storage: A review

Transient Performance of a Thermal Energy Storage-Based Heat Sink Using a Liquid Metal As the Phase Change Material

Phase Change Materials at the Cold/Hot Sides of Thermoelectric Cooler for Temperature Control

Experimental study on an integrated system of thermosyphon loop and vapor compression assisted with phase change material for pulse heat load

Experimental investigation on the influence of phase change material on the output performance of thermoelectric generator

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Experimental and numerical investigations on the intermittent heat transfer performance of rectangular cavity plate fin phase change material based heat sink

Experimental study on thermal behavior of PCM-module coupled with various cooling strategies under different temperatures and protocols

Investigation of Phase Change Material Integrated With High Thermal Conductive Carbon Foam Inside Heat Sinks for Thermal Management of Electronic Components

Heat transfer mechanism and structure design of phase change materials to improve thermoelectric device performance

Transient thermal management of temperature fluctuations during time varying workloads on portable electronics

Experimental investigation of the thermal performance of heat pipe assisted phase change material for battery thermal management system

Study of a novel thermal management system using double-layer liquid-cooled plate-coupled PCM under high-rate discharge

Experimental and numerical study on the cooling performance of heat pipe assisted composite phase change material-based battery thermal management system

Numerical Study on the Cooling Method of Phase Change Heat Exchange Unit with Layered Porous Media

Optimization of Thermal Management for the Environmental Worthiness Design of Aviation Equipment Using Phase Change Materials

Active cooling performance of a PCM-based thermoelectric device: Dynamic characteristics and parametric investigations

Integration of thermal insulation and thermoelectric conversion embedded with phase change materials

Thermal performance assessment of phase change material for electronic cooling: An experimental investigation

Dimensionless study of phase-change-based thermal protection for pulsed electromagnetic machines: Towards heat absorption-dissipation matching