Abstract:Mn3O4 is regarded as a promising anode material for lithium-ion batteries (LIBs) based on its ultrahigh theoretical capacity (937 mAh g-1) and low cost but suffers from poor electronic conductivity and large volume variation during the lithiation/delithiation process, which result in dramatic capacity fading and inferior rate capability. Ti3C2Tx MXene, a novel two-dimensional transition metal carbide with metallic conductivity, excellent mechanical properties, and hydrophilic surface, could be an ideal candidate to improve the lithium storage performance of Mn3O4. Here, a unique flexible, 2D-2D Mn3O4/MXene film is fabricated by assembling 2D Mn3O4 with Ti3C2Tx nanosheets through a simple vacuum filtration approach. In this unique 2D-2D nanostructure, MXene nanosheets buffer the volume change of Mn3O4 during the charge/discharge process. Moreover, the introduction of MXene enables the fabricated 2D-2D nanostructure with excellent flexibility and can be directly used as an electrode for LIBs, which is beneficial for enhancing the energy density of the assembled batteries. As a result, the flexible film of Mn3O4-MXene-8-2 shows excellent lithium storage performances in terms of specific capacity (931 mAh g-1 at 0.05 A g-1), rate capability (624 mAh g-1 at 1 A g-1), and cycling stability, demonstrating its great potential for the application in LIBs.

Electrochemical Properties of MnF_2 Films Fabricated by Pulsed Laser Deposition

Electrochemical Properties of CuF_2 Films Fabricated by Pulsed Laser Deposition

Excellent electrochemical performance and thermal stability of LiNi0.5Mn1.5O4 thin-film cathode prepared by pulsed laser deposition

Manganese Oxyiodide Thin Film Electrodes Prepared by Pulsed Laser Reactive Deposition

Excellent Electrochemical Performance and Thermal Stability of LiNi<sub>0.5</sub>Mn<sub>1.5</sub>O<sub>4</sub> Thin-Film Cathode Prepared by Pulsed Laser Deposition

Unlocking the Electrochemistry Abilities of Nanoscaled Na2/3ni1/4mn3/4o2 Thin Films

High Power and Capacity of Lini0.5mn1.5o4 Thin Films Cathodes Prepared by Pulsed Laser Deposition

The Investigation on Electrochemical Reaction Mechanism of CuF2 Thin Film with Lithium

Nanostructured nickel fluoride thin film as a new Li storage material

Electrospun Manganese Oxides Nanofibers Electrode for Lithium Ion Batteries

Electrochemical Kinetics And Performance Of Layered Composite Cathode Material Li[Li0.2ni0.2mn0.6]O-2

Fabrication of Solid-State Thin-Film Batteries Using LiMnPO4 Thin Films Deposited by Pulsed Laser Deposition

Excimer Laser-Deposited Na2/3Ni1/4Mn3/4O2 Film Cathode for Stable Sodium-Ion Battery

Manganese Selenide Thin Films As Anode Material for Lithium-Ion Batteries

Electrochemical lithium intercalation in nanosized manganese oxides

A nanocrystalline Co3O4 thin film electrode for Li-ion batteries

Cobalt Ferrite Thin Films As Anode Material for Lithium Ion Batteries

Flexible Mn3O4/MXene Films with 2D-2D Architectures as Stable and Ultrafast Anodes for Li-Ion Batteries

High-Capacity, High-Cycling Cathode Material Synthesized by Low-Temperature Solid-State Coordination Method for Lithium Rechargeable Batteries

Electrochemical properties of Sn-substituted LiMn2O4 thin films prepared by radio-frequency magnetron sputtering

The Enhanced Electrochemical Performance of Li1.2Ni0.2Mn0.6O2 Through Coating MnF2 Nano Protective Layer