Abstract:Fluoride is recognized as a vital ion for human and animal growth because of the critical role it plays in preventing skeletal and dental problems. However, when it is ingested at a higher concentration it can cause demineralization of teeth and bones resulting in fluorosis, therefore, the production of high-adsorptive capacity material which is also cost-effective is necessary for the treatment of fluorides. In this study, aluminium foil is valorised into alumina nanoparticles. The as-prepared alumina was modified with alum in two different ratios of 1:0.5 and 1:1 (alumina to alum w/w%) and later used as adsorbents for the removal of fluoride from groundwater. The adsorbents were characterized by Fourier transform infrared spectroscopy, point of zero charge and X-ray diffraction. Different factors that influence the removal efficiency of fluorides such as pH, initial concentrations, contact time and adsorbent dosage were studied and optimized using a simulated fluoride solution. The optimum conditions obtained were used to test real groundwater. The static experiment conditions were used to calibrate a PHREEQC geochemical model which was later used to simulate the fluoride sorption onto the modified alumina at different conditions. PHREEQC was also coupled with parameter estimation software to determine equilibrium constants for the surface reactions between the fluoride species and the adsorbent in a way that the simulations accurately reflect the outcomes of laboratory experiments. Isotherm studies were carried out on the adsorbents. Both Langmuir and Freundlich's non-linear models fitted well for the equilibrium data. However, with a higher coefficient of regression and low chi-square test values, the adsorption process was more of chemisorption on a monolayer surface. Kinetic studies were also carried out by using the non-linear equations from the pseudo-first-order and pseudo-second-order models. The pseudo-second-order model fitted well for the equilibrium data. The mechanism for the fluoride ion adsorption was also studied by the intraparticle (IP) diffusion model and was found that IP was not the rate-determining factor, and therefore the most plausible mechanism for the sorption process was ion exchange or attraction of fluoride ions to the sorbent surface. The findings obtained from this research show that readily available aluminium waste could be valorised into a useful product that could be employed in the removal of fluoride from water samples, including groundwater, that may contain too much fluoride and pose a risk to the general public's health.

19F mas NMR and FTIR analysis of the adsorption of alkali metal fluorides onto alumina

Nmr and Ir Study of Fluorobenzene and Hexafluorobenzene Adsorbed on Alumina

Surface modification of fluorinated aluminas: Application of solid state NMR spectroscopy to the study of acidity and surface structure

Studies on the Preparation of Alumina Supported on Carbon Nanotubes and Defluorination from Absorbed Water

A novel method for synthesis of Co–Al layered double hydroxides and their conversions to mesoporous CoAl 2 O 4 nanostructures for applications in adsorption removal of fluoride ions

Insights into the mechanism of fluoride adsorption over different crystal phase alumina surfaces

Modelling the adsorption of fluoride onto activated alumina in the presence of other ions

The adsorption of Na2[Cu(CN)3] onto alumina: The existence of both crystalline and solvated forms on the surface

Investigation on adsorption of sodium fluoro-aluminates on graphite by density functional theory

CO adsorption on pure, defective and mixed composition AlF3 and MgF2 surfaces

Adsorption of Fluoride Onto Different Types of Aluminas

Removal of Fluoride from Water by Carbon Nanotube Supported Alumina

Adsorption and Reactions of Hfc-134a Gas on the Nascent Surface of Alumina

Preparation of alumina supported on carbon nanotubes and its application in fluoride adsorption from an aqueous solution

ChemInform Abstract: Alumina‐supported Fluoride Reagents for Organic Synthesis: Optimisation of Reagent Preparation and Elucidation of the Active Species.

Adsorption of Fluoride from Water by Amorphous Alumina Supported on Carbon Nanotubes

Fluorination of an Alumina Surface: Modeling Aluminum-Fluorine Reaction Mechanisms

Estimation of the proportions of aluminum-fluorine species in NaF-AlF 3 mixtures by in situ Raman spectroscopy and theoretical simulations

Alumina-supported Fluoride Reagents for Organic Synthesis: Optimisation of Reagent Preparation and Elucidation of the Active Species

Catalytic Properties of Fluorinated Alumina for the Production of Dimethyl Ether

Understanding fluoride adsorption from groundwater by alumina modified with alum using PHREEQC surface complexation model