Abstract:Fluoride is recognized as a vital ion for human and animal growth because of the critical role it plays in preventing skeletal and dental problems. However, when it is ingested at a higher concentration it can cause demineralization of teeth and bones resulting in fluorosis, therefore, the production of high-adsorptive capacity material which is also cost-effective is necessary for the treatment of fluorides. In this study, aluminium foil is valorised into alumina nanoparticles. The as-prepared alumina was modified with alum in two different ratios of 1:0.5 and 1:1 (alumina to alum w/w%) and later used as adsorbents for the removal of fluoride from groundwater. The adsorbents were characterized by Fourier transform infrared spectroscopy, point of zero charge and X-ray diffraction. Different factors that influence the removal efficiency of fluorides such as pH, initial concentrations, contact time and adsorbent dosage were studied and optimized using a simulated fluoride solution. The optimum conditions obtained were used to test real groundwater. The static experiment conditions were used to calibrate a PHREEQC geochemical model which was later used to simulate the fluoride sorption onto the modified alumina at different conditions. PHREEQC was also coupled with parameter estimation software to determine equilibrium constants for the surface reactions between the fluoride species and the adsorbent in a way that the simulations accurately reflect the outcomes of laboratory experiments. Isotherm studies were carried out on the adsorbents. Both Langmuir and Freundlich's non-linear models fitted well for the equilibrium data. However, with a higher coefficient of regression and low chi-square test values, the adsorption process was more of chemisorption on a monolayer surface. Kinetic studies were also carried out by using the non-linear equations from the pseudo-first-order and pseudo-second-order models. The pseudo-second-order model fitted well for the equilibrium data. The mechanism for the fluoride ion adsorption was also studied by the intraparticle (IP) diffusion model and was found that IP was not the rate-determining factor, and therefore the most plausible mechanism for the sorption process was ion exchange or attraction of fluoride ions to the sorbent surface. The findings obtained from this research show that readily available aluminium waste could be valorised into a useful product that could be employed in the removal of fluoride from water samples, including groundwater, that may contain too much fluoride and pose a risk to the general public's health.

Removal of Fluoride from Water by Carbon Nanotube Supported Alumina

Studies on the Preparation of Alumina Supported on Carbon Nanotubes and Defluorination from Absorbed Water

Adsorption of Fluoride from Water by Amorphous Alumina Supported on Carbon Nanotubes

Preparation of alumina supported on carbon nanotubes and its application in fluoride adsorption from an aqueous solution

Adsorption of Fluoride from Water by Aligned Carbon Nanotubes

Fluoride removal on Fe–Al-impregnated granular ceramic adsorbent from aqueous solution

Fluoride Removal Performance of Highly Porous Activated Alumina

Removal of fluoride by hydrous manganese oxide-coated alumina: performance and mechanism.

Treatment effect on the adsorption capacity of alumina for removal fluoride

Adsorption of Fluoride Onto Different Types of Aluminas

Efficient removal of fluoride on aluminum modified activated carbon: an adsorption behavioral study and application to remediation of ground water

Sulfate-doped Fe3O4/Al2O3 nanoparticles as a novel adsorbent for fluoride removal from drinking water

Granular tri-metal oxide adsorbent for fluoride uptake: Adsorption kinetic and equilibrium studies

Fabrication of Manganese-Supported Activated Alumina Adsorbent for Defluoridation of Water: A Kinetics and Thermodynamics Study

Removal of fluoride ion from groundwater by adsorption on lanthanum and aluminum loaded clay adsorbent

Study of Adsorption/Ultrafiltration Process for Fluoride Removal from Drinking Water

Characterization and performance of novel carbon-doped aluminum-modified bentonite for cost-effective fluoride removal

Synthesis and characterization of aluminum-based adsorbent and application in fluoride removal from aqueous solution

Preparation of colloidal hydrated alumina modified NaA zeolite derived from rice husk ash for effective removal of fluoride ions from water medium

Adsorption Characteristics and Charge Transfer Kinetics of Fluoride in Water by Different Adsorbents

Understanding fluoride adsorption from groundwater by alumina modified with alum using PHREEQC surface complexation model