Abstract:Fluoride is recognized as a vital ion for human and animal growth because of the critical role it plays in preventing skeletal and dental problems. However, when it is ingested at a higher concentration it can cause demineralization of teeth and bones resulting in fluorosis, therefore, the production of high-adsorptive capacity material which is also cost-effective is necessary for the treatment of fluorides. In this study, aluminium foil is valorised into alumina nanoparticles. The as-prepared alumina was modified with alum in two different ratios of 1:0.5 and 1:1 (alumina to alum w/w%) and later used as adsorbents for the removal of fluoride from groundwater. The adsorbents were characterized by Fourier transform infrared spectroscopy, point of zero charge and X-ray diffraction. Different factors that influence the removal efficiency of fluorides such as pH, initial concentrations, contact time and adsorbent dosage were studied and optimized using a simulated fluoride solution. The optimum conditions obtained were used to test real groundwater. The static experiment conditions were used to calibrate a PHREEQC geochemical model which was later used to simulate the fluoride sorption onto the modified alumina at different conditions. PHREEQC was also coupled with parameter estimation software to determine equilibrium constants for the surface reactions between the fluoride species and the adsorbent in a way that the simulations accurately reflect the outcomes of laboratory experiments. Isotherm studies were carried out on the adsorbents. Both Langmuir and Freundlich's non-linear models fitted well for the equilibrium data. However, with a higher coefficient of regression and low chi-square test values, the adsorption process was more of chemisorption on a monolayer surface. Kinetic studies were also carried out by using the non-linear equations from the pseudo-first-order and pseudo-second-order models. The pseudo-second-order model fitted well for the equilibrium data. The mechanism for the fluoride ion adsorption was also studied by the intraparticle (IP) diffusion model and was found that IP was not the rate-determining factor, and therefore the most plausible mechanism for the sorption process was ion exchange or attraction of fluoride ions to the sorbent surface. The findings obtained from this research show that readily available aluminium waste could be valorised into a useful product that could be employed in the removal of fluoride from water samples, including groundwater, that may contain too much fluoride and pose a risk to the general public's health.

Study of Adsorption/Ultrafiltration Process for Fluoride Removal from Drinking Water

Application Analysis on the Adsorption Method with Activated Alumina for Processing the Fluorine-Containing Sewage

Removal of fluoride by combined technology of electrocoagulation-flotation-filtration

Column adsorption of fluoride ions by modified activated alumina

Treatment effect on the adsorption capacity of alumina for removal fluoride

An integrated separation technology for high fluoride-containing wastewater treatment: Fluoride removal, membrane fouling behavior and control

Adsorption characterization and mechanism of aluminum based chitosan/zeolite molecular sieve composite for fluoride removal

Defluoridation by Freshly Prepared Aluminum Hydroxides

Review of fluoride removal from water environment by adsorption

Fluoride removal on Fe–Al-impregnated granular ceramic adsorbent from aqueous solution

Size-Dependent Fluoride Removal Performance of a Magnetic Fe3O4@Fe–Ti Adsorbent and Its Defluoridation in a Fluidized Bed

Understanding fluoride adsorption from groundwater by alumina modified with alum using PHREEQC surface complexation model

Fluoride Removal Performance of Highly Porous Activated Alumina

A pilot-scale study of the integrated floc-ultrafiltration membrane-based drinking water treatment process

Synthesis and Study of an Efficient Metal-Organic Framework Adsorbent (MIL-96(Al)) for Fluoride Removal from Water

Removal of fluoride from industrial wastewater by using different adsorbents: A review

Removal of Fluoride from Water by Carbon Nanotube Supported Alumina

Application Progress of New Adsorption Materials for Removing Fluorine from Water

Effect and impact factors of fluoride removal by electricity enhanced adsorption on Al-loaded activated carbon fiber

Defluoridation from aqueous solution using stone dust and activated alumina at a fixed ratio

Granulation of Fe–Al–Ce Nano-Adsorbent for Fluoride Removal from Drinking Water by Spray Coating on Sand in a Fluidized Bed