Abstract:The properties and applications of CNT have been studied extensively since Iijima discovered them in 1991[1,2]. They have exceptional mechanical properties and unique electrical property, highly chemical stability and large specific surface area. Thus far, they have widely potential applications in many fields. They can be used as reinforcing materials in composites[3], field emissions[4], hydrogen storage[5], nanoelectronic components[6], catalyst supports[7], adsorption material and so on. However, the study on the potential application of CNT, environmental protection field in particular, was hardly begun.Long[8] et al. reported that CNT had a significantly higher dioxin removal efficiency than that of activated carbon. The Langmuir adsorption constant is 2.7 × 1052, 1.3 × 1018 respectively. The results indicated that CNT is potential candidate for the removal of micro-organic pollutants. However, the reports on the CNT used as fluoride and heavy metal adsorbent are seldom.In this paper, A novel material, alumina supported on carbon nanotubes (Al2O3/CNT), was prepared from carbon nanotubes and Al(NO3)3. X-ray diffraction (XRD) spectra demonstrate that alumina is amorphous, and scanning electron microscope (SEM) images show that CNT and alumina are homogeneously mixed. Furthermore, the fluoride adsorption behavior on the surface of Al2O3/CNT has been investigated and compared with other adsorbents. The results indicate that Al2O3/CNT has a high adsorption capacity, with a saturation adsorption capacity of 39.4 mg/g. It is also found that the adsorption capacity of Al2O3/CNT is 3.0～4.5 times that of γ-Al2O3while almost equal to that of IRA-410 polymeric resin at 25 ℃. The adsorption isotherms of fluoride on Al2O3/CNT is fit the Freundlich equation well, optimal pH ranging from 5.0 to 9.0.Also in this paper, a novel material, modified carbon nanotubes (CNT), was prepared from carbon nanotubes and HNO3 under boiling condition. Infrared spectroscopy (IR) demonstrates that hydroxyl (-OH) and carbonyl (-C=O) f

Preparation of alumina supported on carbon nanotubes and its application in fluoride adsorption from an aqueous solution

Studies on the Preparation of Alumina Supported on Carbon Nanotubes and Defluorination from Absorbed Water

Fluoride and Lead Adsorption on Carbon Nanotubes

Adsorption of Fluoride from Water by Amorphous Alumina Supported on Carbon Nanotubes

Removal of Fluoride from Water by Carbon Nanotube Supported Alumina

Adsorption of Fluoride from Water by Aligned Carbon Nanotubes

A Novel Method for Synthesis of Co–Al Layered Double Hydroxides and Their Conversions to Mesoporous CoAl2O4 Nanostructures for Applications in Adsorption Removal of Fluoride Ions

The diversified mechanism of adsorption and electro-adsorption technologies by using Ti3AlC2 for removing fluoride

Treatment effect on the adsorption capacity of alumina for removal fluoride

Preparation of 2D carbon ribbon/Al2O3 and nitrogen-doped carbon ribbon/Al2O3 by using MOFs as precursors for removing high-fluoride water

Fluoride Removal Performance of Highly Porous Activated Alumina

Fluoride removal on Fe–Al-impregnated granular ceramic adsorbent from aqueous solution

Preparation of Al–Ce Hybrid Adsorbent and Its Application for Defluoridation of Drinking Water

Insights into the mechanism of fluoride adsorption over different crystal phase alumina surfaces

Enhanced Adsorptive Removal of Methyl Orange and Methylene Blue from Aqueous Solution by Alkali-Activated Multiwalled Carbon Nanotubes

Characterization and performance of novel carbon-doped aluminum-modified bentonite for cost-effective fluoride removal

Intercalation of Rigid Molecules Between Carbon Nanotubes for Adsorption Enhancement of Typical Pharmaceuticals

Efficient Fluoride Removal from Aqueous Solution Using Zirconium-Based Composite Nanofiber Membranes

High Value-Added Utilization of Secondary Aluminum Ash & Carbide Slag: Preparation of a High-Performance Adsorbent for Rapid Removal of Fluoride from Wastewater

Removal of fluoride by hydrous manganese oxide-coated alumina: performance and mechanism.

Preparation of colloidal hydrated alumina modified NaA zeolite derived from rice husk ash for effective removal of fluoride ions from water medium