Abstract:Fluoride is recognized as a vital ion for human and animal growth because of the critical role it plays in preventing skeletal and dental problems. However, when it is ingested at a higher concentration it can cause demineralization of teeth and bones resulting in fluorosis, therefore, the production of high-adsorptive capacity material which is also cost-effective is necessary for the treatment of fluorides. In this study, aluminium foil is valorised into alumina nanoparticles. The as-prepared alumina was modified with alum in two different ratios of 1:0.5 and 1:1 (alumina to alum w/w%) and later used as adsorbents for the removal of fluoride from groundwater. The adsorbents were characterized by Fourier transform infrared spectroscopy, point of zero charge and X-ray diffraction. Different factors that influence the removal efficiency of fluorides such as pH, initial concentrations, contact time and adsorbent dosage were studied and optimized using a simulated fluoride solution. The optimum conditions obtained were used to test real groundwater. The static experiment conditions were used to calibrate a PHREEQC geochemical model which was later used to simulate the fluoride sorption onto the modified alumina at different conditions. PHREEQC was also coupled with parameter estimation software to determine equilibrium constants for the surface reactions between the fluoride species and the adsorbent in a way that the simulations accurately reflect the outcomes of laboratory experiments. Isotherm studies were carried out on the adsorbents. Both Langmuir and Freundlich's non-linear models fitted well for the equilibrium data. However, with a higher coefficient of regression and low chi-square test values, the adsorption process was more of chemisorption on a monolayer surface. Kinetic studies were also carried out by using the non-linear equations from the pseudo-first-order and pseudo-second-order models. The pseudo-second-order model fitted well for the equilibrium data. The mechanism for the fluoride ion adsorption was also studied by the intraparticle (IP) diffusion model and was found that IP was not the rate-determining factor, and therefore the most plausible mechanism for the sorption process was ion exchange or attraction of fluoride ions to the sorbent surface. The findings obtained from this research show that readily available aluminium waste could be valorised into a useful product that could be employed in the removal of fluoride from water samples, including groundwater, that may contain too much fluoride and pose a risk to the general public's health.

Modelling the adsorption of fluoride onto activated alumina in the presence of other ions

Understanding fluoride adsorption from groundwater by alumina modified with alum using PHREEQC surface complexation model

Insights into the mechanism of fluoride adsorption over different crystal phase alumina surfaces

Column adsorption of fluoride ions by modified activated alumina

Adsorption of arsenic and fluoride: Modeling of single and competitive adsorption systems

Process modeling, characterization, optimization, and mechanisms of fluoride adsorption using magnetic agro-based adsorbent

Adsorption of fluoride from aqueous solution by alumina of alkoxide nature: Batch and continuous operation

Modeling defluoridation of real-life groundwater by a green adsorbent aluminum/olivine composite: Isotherm, kinetics, thermodynamics and novel framework based on artificial neural network and support vector machine

Granular tri-metal oxide adsorbent for fluoride uptake: Adsorption kinetic and equilibrium studies

Fluoride Removal Performance of Highly Porous Activated Alumina

Experimental and modeling studies for adsorbing different species of fluoride using lanthanum-aluminum perovskite

Enhanced fluoride removal using montmorillonite clay modified with CoFe2O4 and metal-organic frameworks

Adsorption of Fluoride Onto Different Types of Aluminas

Isotherm Equation Study of F Adsorbed from Water Solution by Fe2(SO4)3-modified Granular Activated Alumina

Removal of Fluoride from Water by Carbon Nanotube Supported Alumina

Synthesis and characterization of aluminum-based adsorbent and application in fluoride removal from aqueous solution

Treatment effect on the adsorption capacity of alumina for removal fluoride

Adsorption of Fluoride from Water by Amorphous Alumina Supported on Carbon Nanotubes

Adsorption Characteristics and Charge Transfer Kinetics of Fluoride in Water by Different Adsorbents

Aluminium fumarate metal-organic framework: A super adsorbent for fluoride from water

Synthesis and characterization of functional calcium-phosphate-chitosan adsorbents for fluoride removal from water