Abstract:Fluoride is recognized as a vital ion for human and animal growth because of the critical role it plays in preventing skeletal and dental problems. However, when it is ingested at a higher concentration it can cause demineralization of teeth and bones resulting in fluorosis, therefore, the production of high-adsorptive capacity material which is also cost-effective is necessary for the treatment of fluorides. In this study, aluminium foil is valorised into alumina nanoparticles. The as-prepared alumina was modified with alum in two different ratios of 1:0.5 and 1:1 (alumina to alum w/w%) and later used as adsorbents for the removal of fluoride from groundwater. The adsorbents were characterized by Fourier transform infrared spectroscopy, point of zero charge and X-ray diffraction. Different factors that influence the removal efficiency of fluorides such as pH, initial concentrations, contact time and adsorbent dosage were studied and optimized using a simulated fluoride solution. The optimum conditions obtained were used to test real groundwater. The static experiment conditions were used to calibrate a PHREEQC geochemical model which was later used to simulate the fluoride sorption onto the modified alumina at different conditions. PHREEQC was also coupled with parameter estimation software to determine equilibrium constants for the surface reactions between the fluoride species and the adsorbent in a way that the simulations accurately reflect the outcomes of laboratory experiments. Isotherm studies were carried out on the adsorbents. Both Langmuir and Freundlich's non-linear models fitted well for the equilibrium data. However, with a higher coefficient of regression and low chi-square test values, the adsorption process was more of chemisorption on a monolayer surface. Kinetic studies were also carried out by using the non-linear equations from the pseudo-first-order and pseudo-second-order models. The pseudo-second-order model fitted well for the equilibrium data. The mechanism for the fluoride ion adsorption was also studied by the intraparticle (IP) diffusion model and was found that IP was not the rate-determining factor, and therefore the most plausible mechanism for the sorption process was ion exchange or attraction of fluoride ions to the sorbent surface. The findings obtained from this research show that readily available aluminium waste could be valorised into a useful product that could be employed in the removal of fluoride from water samples, including groundwater, that may contain too much fluoride and pose a risk to the general public's health.

Modeling defluoridation of real-life groundwater by a green adsorbent aluminum/olivine composite: Isotherm, kinetics, thermodynamics and novel framework based on artificial neural network and support vector machine

Understanding fluoride adsorption from groundwater by alumina modified with alum using PHREEQC surface complexation model

Amino-functionalized novel biosorbent for effective removal of fluoride from water: process optimization using artificial neural network and mechanistic insights

Process modeling, characterization, optimization, and mechanisms of fluoride adsorption using magnetic agro-based adsorbent

Enhanced defluoridation by nano-crystalline alum-doped hydroxyapatite and artificial intelligence (AI) modeling approach

Valorization of waste micro-algal biomass - collected from coke oven effluent treatment plant and evaluation of sorption potential for fluoride removal

Efficient removal of fluoride on aluminum modified activated carbon: an adsorption behavioral study and application to remediation of ground water

Enhanced biosorption of fluoride by extracted nanocellulose/polyvinyl alcohol composite in batch and fixed-bed system: ANN analysis and numerical modeling

Water defluoridation by aluminium oxide–manganese oxide composite material

Development of nanohybrid adsorbent for defluoridation from aqueous systems

Fluoride removal using a rotating anode electro-coagulation reactor: Parametric optimization using response surface methodology, isotherms and kinetic studies, economic analysis and sludge characterization

Study on the Mechanism of Removing Fluoride from Wastewater by Oxalic Acid Modified Aluminum Ash-Carbon Slag-Carbon Black Doped Composite

Competitive Adsorption of Arsenic and Fluoride onto Economically Prepared Aluminum Oxide/Hydroxide Nanoparticles: Multicomponent Isotherms and Spent Adsorbent Management

Synthesis and characterization of aluminum-based adsorbent and application in fluoride removal from aqueous solution

Adsorption of fluoride from aqueous solution by alumina of alkoxide nature: Batch and continuous operation

Modelling the adsorption of fluoride onto activated alumina in the presence of other ions

The model and mechanism of adsorptive technologies for wastewater containing fluoride: A review

An eco-friendly and low-cost methodology for fluoride adsorption using synthesized and characterized ceria-impregnated activated graphite (CIAG)

Defluoridation using novel chemically treated carbonized bone meal: batch and dynamic performance with scale-up studies

Effective defluoridation of industrial wastewater by using acid modified alumina in fixed-bed adsorption column: Experimental and breakthrough curves analysis

Fabrication of Manganese-Supported Activated Alumina Adsorbent for Defluoridation of Water: A Kinetics and Thermodynamics Study