Abstract:Fluoride is recognized as a vital ion for human and animal growth because of the critical role it plays in preventing skeletal and dental problems. However, when it is ingested at a higher concentration it can cause demineralization of teeth and bones resulting in fluorosis, therefore, the production of high-adsorptive capacity material which is also cost-effective is necessary for the treatment of fluorides. In this study, aluminium foil is valorised into alumina nanoparticles. The as-prepared alumina was modified with alum in two different ratios of 1:0.5 and 1:1 (alumina to alum w/w%) and later used as adsorbents for the removal of fluoride from groundwater. The adsorbents were characterized by Fourier transform infrared spectroscopy, point of zero charge and X-ray diffraction. Different factors that influence the removal efficiency of fluorides such as pH, initial concentrations, contact time and adsorbent dosage were studied and optimized using a simulated fluoride solution. The optimum conditions obtained were used to test real groundwater. The static experiment conditions were used to calibrate a PHREEQC geochemical model which was later used to simulate the fluoride sorption onto the modified alumina at different conditions. PHREEQC was also coupled with parameter estimation software to determine equilibrium constants for the surface reactions between the fluoride species and the adsorbent in a way that the simulations accurately reflect the outcomes of laboratory experiments. Isotherm studies were carried out on the adsorbents. Both Langmuir and Freundlich's non-linear models fitted well for the equilibrium data. However, with a higher coefficient of regression and low chi-square test values, the adsorption process was more of chemisorption on a monolayer surface. Kinetic studies were also carried out by using the non-linear equations from the pseudo-first-order and pseudo-second-order models. The pseudo-second-order model fitted well for the equilibrium data. The mechanism for the fluoride ion adsorption was also studied by the intraparticle (IP) diffusion model and was found that IP was not the rate-determining factor, and therefore the most plausible mechanism for the sorption process was ion exchange or attraction of fluoride ions to the sorbent surface. The findings obtained from this research show that readily available aluminium waste could be valorised into a useful product that could be employed in the removal of fluoride from water samples, including groundwater, that may contain too much fluoride and pose a risk to the general public's health.

Competitive Adsorption of Arsenic and Fluoride onto Economically Prepared Aluminum Oxide/Hydroxide Nanoparticles: Multicomponent Isotherms and Spent Adsorbent Management

Adsorption of arsenic and fluoride: Modeling of single and competitive adsorption systems

Reusability of Al-F Hydroxide Precipitates Generated in Adsorption and Coagulation Treatment of Fluoride for Adsorptive Removal of Arsenic

Nanoalumina-supported Mn2O3 as efficient adsorbent for removal of fluoride and arsenic from water: a study from lab to field

Modeling defluoridation of real-life groundwater by a green adsorbent aluminum/olivine composite: Isotherm, kinetics, thermodynamics and novel framework based on artificial neural network and support vector machine

Disposable Waste Aluminium Pan Derived Pseudoboehmite Nanoparticles for Concurrent Removal of Fluoride and Arsenate from Aqueous Medium

Understanding fluoride adsorption from groundwater by alumina modified with alum using PHREEQC surface complexation model

Screening of Metal Oxides and Hydroxides for Arsenic Removal from Water Using Molecular Dynamics Simulations

Arsenic sorption onto titanium dioxide, granular ferric hydroxide and activated alumina: batch and dynamic studies

Tailoring the Structure of Fe-Based NH2-MIL-88 via 2-Hydroxyacetophenone for Arsenic Removal from Aqueous Solutions: Kinetics, Adsorption Isotherms Studies, and Optimization through Box-Behnken Design

Versatility, Cost Analysis, and Scale-up in Fluoride and Arsenic Removal Using Metal-organic Framework-based Adsorbents

Simultaneous Removal of Arsenate and Fluoride by Iron and Aluminum Binary Oxide: Competitive Adsorption Effects

Arsenic removal through adsorption, sand filtration and ultrafiltration: In situ precipitated ferric and manganese binary oxides as adsorbents

Competitive Adsorption Behaviors of Arsenite and Fluoride Onto Manganese-Aluminum Binary Adsorbents

Study of adsorption capacity and mechanism of nano-alumina for arsenic ion by isothermal adsorption model simulations

Adsorption of fluoride from aqueous solution by alumina of alkoxide nature: Batch and continuous operation

Efficient removal of fluoride on aluminum modified activated carbon: an adsorption behavioral study and application to remediation of ground water

Simultaneous removal of arsenate and arsenite in water using a novel functional halloysite nanotube composite

Arsenic removal using iron oxide nanoparticles produced employing a green synthesis approach

Fluoride Removal from Aqueous Solutions via Adsorption Using Raw, Calcined, and Chemically Treated Laterite Mineral