Abstract:Compacted graphite cast iron (CGI) is a potential alternative to lightweight alloys. It is accepted that CGI can effectively reduce the automobile total weight by virtue of its high strength and its high thermal conductivity giving an opportunity to designers to design components with thinner sections. However, the successful casting process to produce this material requires detailed information for the prediction of microstructure and accurate casting process knowledge. In this paper, compacted graphite with four different cooling rates and with different Mg/S ratios ranging from 2/3 to 7/1 has been produced by using a plunger technique. The oxygen potential of all ranges has been measured by using a special oxygen potential measuring device equipped with a vibrating oxygen measurement sensor. The relationship between the oxygen potential and the graphite shape was investigated and the oxygen potential range to produce compacted graphite iron was established. It has been demonstrated that the oxygen potential measurement is a valuable method to evaluate the potential of cast iron melts to produce compacted graphite iron. La fonte à graphite compact (CGI) est une substitution possible des alliages légers. On accepte que la CGI puisse effectivement réduire le poids total de l’automobile en raison de sa grande résistance et de sa conductivité thermique élevée, donnant ainsi la chance aux concepteurs de créer des éléments à profilés plus minces. Cependant, le procédé de moulage efficace pour la production de ce matériau nécessite une information détaillée pour la prédiction de la microstructure et une connaissance précise du procédé de moulage. Dans cet article, on décrit la production de graphite compact à quatre vitesses différentes de refroidissement et à rapports différents de Mg/S variant de 2/3 à 7/1, en utilisant une technique de piston d’injection. On a mesuré le potentiel-oxygène de toute la gamme en utilisant un appareil particulier pour mesurer le potentiel-oxygène, équipé d’un capteur à vibration pour la mesure d’oxygène. On a étudié la relation entre le potentiel-oxygène et la forme de graphite et l’on a établi la gamme de potentiel-oxygène pour produire de la fonte à graphite compact. On a démontré que la mesure du potentiel-oxygène était une méthode valable pour évaluer le potentiel des bains de fonte pour produire de la fonte à graphite compact.

Identification and evaluation of modification level for compacted graphite cast iron

Controlling Melt Quality of Compacted Graphite Iron

Quantitative Measurement of Compacted Graphite Cast Iron Melt Quality

Investigation of Material Properties Based on 3D Graphite Morphology for Compacted Graphite Iron

Evaluation of Melt Quality and Graphite Degeneration Prediction in Heavy Section Ductile Iron

Assessment of Modification Level of Hypoeu- Tectic Al-Si Alloys by Pattern Recognition of Cooling Curves

Evaluating Melt Iron Features by Computer Aided Recognition of Thermal Analysis Cooling Curves

Turning processes and mechanism of compacted graphite iron used for high performance engine

Intelligent Evaluation of Melt Iron Quality by Pattern Recognition of Thermal Analysis Cooling Curves

Columnar-to-Equiaxed Transition in Cast Irons: An Experimental and Numerical Analysis

Regression Analysis and Optimum Values of Austempering Affecting Mechanical Properties of Compacted Graphite Iron

Study on Prediction of Graphite Degeneration Tendency of Heavy Section Ductile Iron Melt

A study investigating the cutting mechanism of compacted graphite iron based on a novel microstructure of finite element model

Low-Cycle Fatigue Damage Mechanism and Life Prediction of High-Strength Compacted Graphite Cast Iron at Different Temperatures

On the Morphology Variation of Graphite in Ductile Cast Iron through Severe Plastic Deformation

Effect of Carbon and Cooling Rate on the Structure of Hypereutectic High Chromium Cast Iron in the Cast State and after Heat Treatment

Creep deformation and damage mechanism of compact graphite cast iron with different pearlite contents

Fuzzy Neural Network Analysis on the Compacted Graphite Iron with Improved Tensile and Heat Transport Properties

Study on Influence of Surface Coating During Cooling Slope Rheocasting Process

Numeral Thermal Analysis and Judging Technique of Cast Iron Melt Quality Characterization

OXYGEN POTENTIAL VALUES TO PRODUCE COMPACTED GRAPHITE CAST IRON