Abstract:The microstructure evolution of IN617 during creep under 30 MPa, 23 MPa, and 16 MPa at 1000 degrees C was characterized after creep ruptured tests and interrupted tests. As the applied stress was decreased, three different microstructure characteristics were found (i.e., dynamic recrystallization, classic creep voids, and precipitates coarsening), which were related to microstructural factors such as dislocation configuration, grain boundary (GB) weakening, and nitrogen diffusion and brittle-phase precipitation. The results indicated that the high stress of 30 MPa promoted the significant multiplication of dislocations that rearranged into high-density and low energy substructures, leading to recrystallization and ductile rupture. When stress was decreased to 23 MPa, dislocations only formed loose tangles causing intragranular strengthening, and GB weakening was involved because most intergranular precipitates that could have exerted the pinning effect dissolved. Therefore, inter granular rupture occurred under the combined effect of intragranular strengthening and GB weakening. As stress was as low as 16 MPa, precipitates that existed in the as-received condition completely dissolved and abundant nitrogen diffused into the specimen from the furnace atmosphere through creep cracks, promoting the formation of brittle nitrides (pi phase and AlN). The brittle pi phase forming continuous networks along GBs was vulnerable to internal cracking, and the needle AlN precipitating inside grains caused the AlN/matrix interfacial cracking, which exerted a synergetic effect on brittle fracture.

Creep deformation and damage mechanism of compact graphite cast iron with different pearlite contents

The damage mechanism of tension-tension fatigue interaction with creep damage of the compacted graphite cast iron alloy at high temperatures

An Investigation of the Effect of High-Temperature Cyclic Straining and Creep Loading on Tensile Mechanical Properties of GH4145/SQ Alloy

Low-Cycle Fatigue Damage Mechanism and Life Prediction of High-Strength Compacted Graphite Cast Iron at Different Temperatures

Investigation on creep behaviours of centrifugal casting 27Cr44Ni5W3Al+MA alloy used as ethylene pyrolysis furnace tube at 1050°C

Creep crack growth of GH3535 alloy at elevated temperatures

Effect and mechanism of constraint on creep crack growth behavior of GH3535 alloy

Creep Behavior and Deformation Mechanism of a Third-Generation Single Crystal Ni-Based Superalloy at 980 °C

Low Cycle Fatigue and Creep Fatigue Interaction Behavior of 9Cr-0.5Mo-1.8w-v-nb Heat-Resistant Steel at High Temperature

Impacts of different designed microstructures on creep performance of a Ni-based wrought superalloy

Creep behaviors of fine-grained Ni-base powder metallurgy superalloys at elevated temperatures

Creep behaviors and deformation mechanisms at intermediate temperatures in a novel γ‐γ' nickel‐based superalloy

A Creep Constitutive Model, Based on Deformation Mechanisms and Its Application to Creep Crack Growth

Low Cycle Fatigue Crack Growth Rate of Compacted Graphite Cast Iron

Turning processes and mechanism of compacted graphite iron used for high performance engine

Correlation of Creep Fracture Lifetime with Microstructure Evolution and Cavity Behaviors in G115 Martensitic Heat-Resistant Steel

On the Morphology Variation of Graphite in Ductile Cast Iron through Severe Plastic Deformation

Microstructural evolution and creep mechanism of a directionally solidified superalloy DZ125 under thermal cycling creep

Hot deformation behavior and flow stress modeling of coarse-grain nickel-base GH4151 superalloy ingot materials in cogging

Creep Behavior and Microstructure Evolution of Ni-based Alloy IN617 at 1000 °C

An Experimental and Modeling Investigation on Creep Mechanical Behavior of Granite Under Triaxial Cyclic Loading and Unloading