Abstract:Low-cycle fatigue (LCF) behavior of nickel-based precipitation-strengthened superalloy GH4145/SQ was investigated systematically under fully reversed total strain amplitude control conditions at 538°C in laboratory air. It was shown that the alloy exhibited a pronounced initial fatigue hardening followed by continuous fatigue softening to failure at high strain amplitudes, while at low strain amplitudes the initial hardening was followed by a well-defined saturation stage. Microstructure observations using optical and transmission-electron microscopy revealed that slip band density increased with increasing total strain amplitudes and the size of the γ′precipitates tended to reduction due to repeated shearing by the dislocations with continuous cyclic straining. The above changes in microstructures during cycling were essentially responsible for the fatigue hardening–softening behavior of the alloy. Both optical and SEM micrographs indicated that at low strain amplitudes crack propagation was basically transgranular, while at high strain amplitudes crack propagation was essentially intergranular. Bilinear behavior with a change of slope at a plastic strain amplitude of about 0.2pct was observed in cyclic stress–strain (CSS), Coffin–Manson (C–M) and plastic strain energy–life plots. A change in the number of operating slip systems and the fracture modes with the strain amplitude employed was used to explain this two-slope characteristic. In both the companion specimens test (CST) and the incremental step test (IST) methods the alloy exhibited non-masing type behavior. It was suggested that, for the first approximation, the half-life plastic strain energy could be calculated directly according to the equation without reckoning in the non-masing behavior.

Low Cycle Fatigue Crack Growth Rate of Compacted Graphite Cast Iron

Low-Cycle Fatigue Damage Mechanism and Life Prediction of High-Strength Compacted Graphite Cast Iron at Different Temperatures

Low cycle fatigue behavior of nickel-based superalloy GH4145/SQ at elevated temperature

Test System of Low-Cycle Fatigue Crack Growth Rate

Investigation on the Thermal Crack Evolution and Oxidation Effect of Compacted Graphite Iron under Thermal Shock

The damage mechanism of tension-tension fatigue interaction with creep damage of the compacted graphite cast iron alloy at high temperatures

Low Cycle Fatigue and Creep Fatigue Interaction Behavior of 9Cr-0.5Mo-1.8w-v-nb Heat-Resistant Steel at High Temperature

Low Cycle Fatigue Crack Growth Behavior of Modified Rotor Steel under High-Temperature

High-temperature oxidation behaviour and influence on the fracture property of compacted graphite iron

Microstructure based cracking behavior and life assessment of titanium alloy under very-high-cycle fatigue with elevated temperatures

Influence of Thermal Cycle Maximum Temperature on Thermal Fatigue Resistance of Vermicular Graphite Cast Iron

Evaluation of Thermal Fatigue Life and Crack Morphology in Brake Discs of Low-Alloy Steel for High-Speed Trains

Fatigue cracking behavior and life assessment of TC11 titanium alloy in very high cycle regime at two working temperatures

The fatigue properties, microstructural evolution and crack behaviors of low-carbon carbide-free bainitic steel during low-cycle fatigue

A fatigue life prediction approach to interior cracking induced high cycle and very high cycle fatigue for surface‐carburized steels

A comparative study of low cycle fatigue behavior and microstructure of Cr-based steel at room and high temperatures

An Evaluation on Fatigue Crack Growth in a Fine-Grained Isotropic Graphite

Crack growth behavior of low carbon steel at high temperature

The Low-Cycle Fatigue Behavior, Microstructure Evolution, and Life Prediction of SS304: Influence of Temperature

Fatigue life prediction of Ti60 titanium alloy under very high cycle loading at different temperatures

The low cycle fatigue property, damage mechanism, and life prediction of additively manufactured Inconel 625: Influence of temperature