OXYGEN POTENTIAL VALUES TO PRODUCE COMPACTED GRAPHITE CAST IRON

O. ELMABROUK,A. KALKANLI,E. SELÇUK,A. ÇETIN
DOI: https://doi.org/10.1179/cmq.2008.47.2.173
2008-01-01
Canadian Metallurgical Quarterly
Abstract:Compacted graphite cast iron (CGI) is a potential alternative to lightweight alloys. It is accepted that CGI can effectively reduce the automobile total weight by virtue of its high strength and its high thermal conductivity giving an opportunity to designers to design components with thinner sections. However, the successful casting process to produce this material requires detailed information for the prediction of microstructure and accurate casting process knowledge. In this paper, compacted graphite with four different cooling rates and with different Mg/S ratios ranging from 2/3 to 7/1 has been produced by using a plunger technique. The oxygen potential of all ranges has been measured by using a special oxygen potential measuring device equipped with a vibrating oxygen measurement sensor. The relationship between the oxygen potential and the graphite shape was investigated and the oxygen potential range to produce compacted graphite iron was established. It has been demonstrated that the oxygen potential measurement is a valuable method to evaluate the potential of cast iron melts to produce compacted graphite iron. La fonte à graphite compact (CGI) est une substitution possible des alliages légers. On accepte que la CGI puisse effectivement réduire le poids total de l’automobile en raison de sa grande résistance et de sa conductivité thermique élevée, donnant ainsi la chance aux concepteurs de créer des éléments à profilés plus minces. Cependant, le procédé de moulage efficace pour la production de ce matériau nécessite une information détaillée pour la prédiction de la microstructure et une connaissance précise du procédé de moulage. Dans cet article, on décrit la production de graphite compact à quatre vitesses différentes de refroidissement et à rapports différents de Mg/S variant de 2/3 à 7/1, en utilisant une technique de piston d’injection. On a mesuré le potentiel-oxygène de toute la gamme en utilisant un appareil particulier pour mesurer le potentiel-oxygène, équipé d’un capteur à vibration pour la mesure d’oxygène. On a étudié la relation entre le potentiel-oxygène et la forme de graphite et l’on a établi la gamme de potentiel-oxygène pour produire de la fonte à graphite compact. On a démontré que la mesure du potentiel-oxygène était une méthode valable pour évaluer le potentiel des bains de fonte pour produire de la fonte à graphite compact.
metallurgy & metallurgical engineering
What problem does this paper attempt to address?