Abstract:Diffusion and polymerization behaviour of styrene (St) in commercially. available high density polyethylene (HDPE) pellets were studied and HDPE/PS nanoblend pellets were synthesized. Both the diffusion and polymerization steps were carried out in water medium. At 70 - 90 degrees C, diffusion behaviour of St towards HDPE pellets showed features of Fickian Diffusion. The saturation values of diffused St were different at different diffusion temperatures, and higher diffusion temperature meant higher saturation value, higher diffusion rate and shorter time to reach the saturation value. The amount of the initiator BPO was important in view of PS content in the pellets. With 0. 5 wt% - 1 wt% BPO, PS content was 11 wt% when diffusion and polymerization were carried out at 90 degrees C, while the PS content increased to about 16 wt% when excess amount of BPO (5 wt%) was used. The diametrical distribution of PS was investigated by Micro Fourier Transform Infrared Spectroscopy, showing that PS appeared throughout the HDPE pellets. PS distributions along the diameters of the pellets showed similar "M" shape curves for HDPE/PS pellets synthesized with different amounts of BPO. The peaks of the curves appeared at 200 mu m area to the surface and were related to crystalline structure of HDPE pellets. The phase morphology of PS in the blend pellets were characterized by field emission scanning electron microscopy. Typical sea. island morphology was revealed with an average particle size of less than 100 nm. The HDPE/PS blend pellets were melt. processed into cylindrical bars. PS phases in the extrusion bars of the blend pellets synthesized with 0. 5 wt% BPO showed Ci Rice morphology, reflecting that PS particles were aggregating instead of coalescing during processing, and particle sizes were from tens of nm to 200 nm. The disperse PS phase and HDPE matrix had good interaction and the HDPE/PS bars did not break with elongation of 600% and showed higher tensile stress than pure HDPE bars, which meant that 0. 5 wt% BPO was fairly good condition for preparing HDPE/PS nanoblends or other modified HDPE materials.

Bromination of Polystyrenes and Their Blends with Polybutylene Terephthalate

Bromination of PS and Blend with PS

Preparation of Brominated Polystyrenes and Their Blends with Polyamide

Compatibilizing Efficiency of Copolymer Precursors for Immiscible Polymer Blends

Synthesis of Brominated Flame Retardants with Different Brominated Structures and Study on Flame Retardancy of Polystyrene Resin

Effect of Styrene-Maleic Anhydride Copolymer on Properties of PBST/PLA Blends

Polypropylene/Polystyrene Blends Prepared by Diffusion and Subsequent Polymerization in Polypropylene Pellets after Injection Molding

Morphology, thermal behavior, rheological, and mechanical properties of polypropylene/polystyrene blends based on elongation flow

Properties of Polar SBS/PS Thermoplastic Elastomer Prepared by Blending Modification

Morphology stabilization of the polypropylene/polystyrene nanoblends prepared by diffusion and polymerization of styrene in isotactic polypropylene pellets during melt mixing by the incorporation of divinylbenzene

Studies on the Terpolymer of Poly(silylene-acetylenearyleneacetylene)/Benzoxazine/Cyanate Ester

Enhancement of the Compatibility, Mechanical Properties, and Heat Resistance of Poly(butylene Succinate-Co-terephthalate)/poly(butylene Succinate) Blends by the Addition of Chain Extender and Nucleating Agent

Diffusion and Polymerization Behavior of Styrene in High Density Polyethylene Pellets

Influences of Compatibilization and Compounding Process on Electrical Conduction and Thermal Stabilities of Carbon Black‐filled Immiscible Polypropylene/polystyrene Blends

Preparation and Properties of Thermal Conducting PBT/PA Blends

Green preparation of poly (butylene succinate-co-butylene terephthalate) foam with tunable degradability and mechanical properties by supercritical CO2

Mechanical Properties and Thermal Behavior of TPS/PBS Blends with Maleated PBS As a Compatibilizer

Miscibility, Thermal Stability, Rheological and Mechanical Properties of Blends Derived from Polysulfone Oligomer and Poly (phthalazinone Ether Sulfone Ketone)

Investigation of a Combination of Novel Polyphosphoramide and Boron-Containing Compounds on the Thermal and Flame-Retardant Properties of Polystyrene

Effect of Halogen-antimony Flame Retardant System on Thermoplastic Polyester Elastomer

Production and characterization of flame-retardant poly (butylene terephthalate) composites containing boron compounds