Abstract:A NiO-YSZ anode-supported hollow fiber solid oxide fuel cell (HF-SOFC) has been fabricated with redox stable (La0.75Sr0.25)(0.95)Cr0.5Mn0.5O3-delta-Sm0.2Ce0.8O1.9-YSZ (LSCM-SDC-YSZ) composite cathode. The characterization of NiO-YSZ hollow fibers prepared by the phase inversion method is focused on the microstructure, porosity, bending strength and electrical conductivity. A thin YSZ electrolyte membrane (about 10 mu m) can be prepared by a vacuum-assisted dip-coating process and is characterized in terms of microstructure and gas-tightness. The performance of the as-prepared HF-SOFC is investigated at 750-850 degrees C with humidified H-2 as fuel and ambient air as the oxidant. The peak power densities of 513, 408 and 278 mW cm(-2) can be obtained at 850, 800 and 750 degrees C, respectively, and the corresponding interfacial polarization resistances are 0.14, 0.29 and 0.59 Omega cm(2). The high performance at intermediate-to-high temperatures could be attributed to thin electrolyte and proper composite cathode with low interfacial polarization resistance. The low interfacial polarization resistance suggests potential applications of LSCM-SDC-YSZ composite oxides as the redox stable cathode. This investigation indicates that the redox stable LSCM-SDC-YSZ is a promising cathode material system for the next generation YSZ-based HF-SOFC. The results will be expected to open up a new phase of the research on the micro-tubular SOFCs. (C) 2010 Professor T. Nejat Veziroglu. Published by Elsevier Ltd. All rights reserved.

Fabrication and Characterization of Anode-Supported Micro-Tubular Solid Oxide Fuel Cell Based on BaZr0.1Ce0.7Y0.1Yb0.1O3−δ Electrolyte

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

An ammonia fuelled SOFC with a BaCe0.9Nd0.1O3-δ thin electrolyte prepared with a suspension spray

Fabrication and Electrochemical Characterization of Anode-Supported Microtubular Solid Oxide Fuel Cells Based on Ce0.8sm0.2o2-D Electrolytes

In situ drop-coated BaZr0.1Ce0.7Y0.2O3-δ electrolyte-based proton-conductor solid oxide fuel cells with a novel layered PrBaCuFeO5+δ cathode

Fabrication and Properties of Anode-Supported Solid Oxide Fuel Cell

Fabrication and performance of a proton-conducting solid oxide fuel cell based on a thin BaZr0.8Y0.2O3-δ electrolyte membrane

Micro-Tubular Solid Oxide Fuel Cell with Asymmetric Structure Anode and La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode

High performance of anode supported BaZr0.1Ce0.7Y0.2O3−δ(BZCY) electrolyte cell for IT-SOFC

Fabrication and Performance of Ceramic Anode-Supported Solid Oxide Fuel Cells

Optimization of BaZr0.1Ce0.7Y0.2O 3-δ-based proton-conducting solid oxide fuel cells with a cobalt-free proton-blocking La0.7Sr0.3FeO 3-δ-Ce0.8Sm0.2O2-δ composite cathode

Preparation and Performance of Tri-layer Composite Anode Supported Fuel Cell

Fabrication and performance of anode-supported proton conducting solid oxide fuel cells based on BaZr0.1Ce0.7Y0.1Yb0.1O3-δ electrolyte by multi-layer aqueous-based co-tape casting

High Performance Tubular Solid Oxide Fuel Cells With Bscf Cathode

A novel single phase cathode material for a proton-conducting SOFC

High Performance of Proton-Conducting Solid Oxide Fuel Cell with a Layered PrBaCo2O5+δ Cathode

Fabrication of BaZr0.1Ce0.7Y0.2O3 – Δ ‐based Proton‐Conducting Solid Oxide Fuel Cells Co‐Fired at 1,150 °C

Fabrication And Performance Of Anode-Supported Proton Conducting Solid Oxide Fuel Cells Based On Bazr0.1ce0.7y0.1yb0.1o3-Delta Electrolyte By Multi-Layer Aqueous-Based Co-Tape Casting

Characterization of one-step co-fired BaZr0.8Y0.2O3-δ-La2Ce2O7 composite electrolyte for low-temperature solid oxide fuel cells

An Anode-Supported Micro-Tubular Solid Oxide Fuel Cell with Redox Stable Composite Cathode

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte