Abstract:The working condition of the linear compressor greatly affects the performance of the cryocooler. When the cryocooler operates during a transient working state like the cool down process, the linear compressor is also in a transient working state and could lead to deviation from designed steady state condition. In order to study the transient behavior of a linear compressor during the cool down process, a theoretical model based on the finite difference method is proposed. The temperature distribution of the regenerator during the cool down process is calculated. The variation of the impedance of the cold finger is then calculated. The transient behavior of the linear compressor are studied according to the impedance match between the compressor and the cold finger. The theoretical model shows that the transient behavior of the linear compressor is determined by the variation of the cold finger impedance during the cool down process and the increase of the input power could be larger than 40% with constant input voltage through the whole cool down process. A Sage simulation model of the cryocooler is built and the cool down experiments are carried out. The simulation and the experiment results are consistent with the theoretical model. It's also shown that the theoretical model could provide better prediction of the transient behavior of the linear compressor. The study of the transient behavior of the linear compressor could help improve the design and control of the linear compressor especially for the transient process.

Linear model analysis of a double-inlet pulse tube cooler

Complete linear model for double-inlet pulse tube cooler

Generation Mechanism of DC Flow in Double-Inlet Pulse Tube Coolers

Phase Shift Mechanism of Pulse Tube Cooler Based on Fluid Network Theory

Influence of Input Acoustic Power on Regenerator’s Performance

Development and Validation of Helical-Coil-in-fluted-tube Gas Cooler for CO2 Heat Pump Water Heaters

Experimental Investigation of Regenerator Matrices on Performance of Pulse Tube Cooler

Investigation on High-Performance Single-Stage GM-Type Pulse Tube Cooler

The Numerical Analysis Of Ventilation And Temperature Fields For A Bulb Tubular Turbine Generator

A Numerical Model Of A Miniature Multi-Bypass Pulse Tube Cooler

A Computational Model for Two-Stage 4K-Pulse Tube Cooler: Part II. Predicted Results

A Numerical Model of A 4k Two-Stage Pulse Tube Cooler with Mixed Eulerian-Lagrangian Method

Numerical Simulation of a GM-type Pulse Tube Cryocooler System: Part II. Rotary Valve and Cold Head

Analysis of Pulse Tube Cooler with Cold-End Reservoir

A Study on the Interstage Cooling Capacity Shifting of Stirling/pulse Tube Hybrid Cooler Based on an Idealized Model

A Computational Model for Two-Stage 4K-Pulse Tube Cooler: Part I. Theoretical Model and Numerical Method

Theoretical and Experimental Study for the Transient Behavior of a Linear Compressor During Pulse Tube Cryocooler Cool Down Process

Modeling of Heat Transfer and Oscillating Flow in the Regenerator of A Pulse Tube Cryocooler Operating at 50 Hz

Computational Fluid Dynamic Simulation of an Inter-Phasing Pulse Tube Cooler

Experimental investigation of the double-inlet on the cooling performance of a single-stage G-M type pulse tube cryocooler

Analysis on The Performance of Fin-tube Heat Exchanger with Different Structures in Variable Conditions