Abstract:Preparation process and microstructure of CF/CNTs reinforcements and mechanical properties of their composites. Chemical vapor deposition (CVD) method was performed to grow carbon nanotubes (CNTs) on oxidized carbon fiber (CF). First, CF was oxidized by a simple and gentle way to increase the number of active groups and the optimal treatment time was determined. Then, effects of catalyst concentration and growth time on morphologies and loading amount of CNTs, the properties of CF/CNTs reinforcements, and the interlayer properties of CF/CNTs composites were explored. When the catalyst concentration and growth time were controlled at a reasonable level, CNTs can be uniformly grown on the CF surface. The interlaminar shear strength (ILSS) was characterized and the fracture surfaces of CF/CNTs composites were observed. The results demonstrated that when the catalyst precursor was kept at 0.05 mol/L and the growth time was controlled at 10 min, CNTs had the best strength effect and the ILSS increased by 30.25% compared to that of composites without CNTs. The fracture surface showed that CNTs can penetrate the matrix at the interface and enhance the interface through mechanical interlocking effect. The CNTs‐induced interphase allows the stress inside the composites to propagate continuously between resin and fibers, thereby heightening the load carrying capacity. Highlights A simple and gentle way was performed to activate CF without strength reduction. The influence mechanism of various parameters was revealed in detail. The mechanism of CNTs enhancing the interface was revealed.

Growth of One Dimensional Nanocarbons on Bamboo Based Porous Carbon

Preparation of Bamboo-based Porous Carbons with Tunable Structure by Growing Carbon Nanofibers

Study on Bamboo-Derived Activated Carbon As Catalyst Support

Growth and Characterization of Bamboo-Like Multiwalled Carbon Nanotubes over Cu/Al2o3 Catalyst

Research Progress in Growth of One Dimensional Nanocarbons on Carbon Substrate

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

SYNTHESIS OF CARBON NANOTUBES/BAMBOO CHARCOAL COMPOSITE AND ITS ADSORPTION PERFORMANCE FOR LEAD IONS

Preparation of Three-Dimensional Carbon Microtube/Carbon Nanotube Composites and Their Application in Supercapacitor

In situ growth of CNTs on carbon fiber by chemical vapor deposition

One‐step in‐situ growth of CNTs on oxidized carbon fiber: Effects of catalyst concentration and growth time on mechanical properties of carbon fiber

Effect of growing CNTs onto bamboo charcoals on adsorption of copper ions in aqueous solution

Spatial confined growth of carbon nanotubes in pore channels of microporous ceramic supports with improved filtration efficiency

Porous Carbon Nanofibers: Preparation and Potential Applications

Carbon fiber-promoted activation of catalyst for efficient growth of single-walled carbon nanotubes

Growth of High-Density Parallel Arrays of Ultralong Carbon Nanotubes with Catalysts Pinned by Silica Nanospheres

The confined growth of double-walled carbon nanotubes in porous catalysts by chemical vapor deposition

MICROSTRUCTURE OBSERVATION OF ALIGNED CARBON NANOTUBES AND SUGGESTION OF THEIR GROWTH MECHANISM

Dimensionality Control of 1D Coupling Reaction for the Facile Preparation of Porous Carbon Nanofibers

In-situ growth of scaly carbon nanotube by Cu@Ni core-shell catalyst on continuous carbon fiber surface for multiply tenoned composite interphase

Supercritical CO2-driven, Periodic Patterning on One-Dimensionals Carbon Nanomaterials

Pyrolytic Synthesis of Conical Carbon Fibers with Carbon Nanotube Tips on Carbon Substrates