Abstract:Because of its extreme hardness, wear resistance, good thermal conductivity and low thermal expansion coefficients, a diamond tool exhibits a range of properties which makes it a key and unique component in many fields of mechanical engineering. In comparison with the other types of diamond tools, the thin film diamond-coated cutting inserts have great potentialities in the commercial application because of its low costs for fabrication equipment and high performance. Thus, they are on the verge of becoming the next generation of tools used for high speed machining non-ferrous metals and alloys, metal-compound materials, and hard brittle non-metals. However, the poor adhesion of the diamond film on the substrate becomes the main technical barriers for the successful development and commercialization of diamond-coated tools. In this paper, diamond thin films were deposited on WC-Co cemented carbide substrates by the electron aided hot filament chemical vapor deposition (EACVD), using a mixture of hydrogen and acetone as source gases. A new multiple chemical pre-treatment including microwave oxidation, reaction in alkaline solution and cleaning by ultrasonic treatment in acid solution has been performed for free shape cemented WC-Co drills in order to increase the diamond nucleation and to enhance the coating adhesion. And also, another new pretreatment method using Ar-HZ gas etching decarburization by microwave plasma is performed for the WC-Co substrate surface. The influences of this pretreatment technique on the adhesion strength, diamond nucleation and surface morphology of the diamond thin film are investigated. Scanning electron microscope (SEM) was used to view the substrate morphology, and to examine the cobalt removal. After pre-treatment, the surface of the WC-Co substrate becomes slightly rough, but its composition and structure shows no changes identified by X-ray diffraction (XRD). Scanning electron microscope (SEM) indicates a distribution of uniform micro-roughness WC grains on substrate surface. And also the research results show that the pretreatment using Ar-H etching decarburization by microwave plasma is an effective method to enhance adhesive strength. The appropriate CVD processes were studied for the fabrication of tools with complex geometries. An adequate amount of additive can effectively prevent the overflow of Co from inner to surface of the substrate and avoid the catalytic effect of Co during CVD. The smooth diamond film with low surface roughness can be deposited by increasing the carbon source concentration and reducing the reactive pressure at the later stage of CVD process. The diamond morphology quality and homogeneity of coatings were characterized by SEM and Raman spectroscopy. The cutting performances of diamond-coated tools were studied by the cutting tests of difficult-to-machine materials. The research results show that the high quality diamond coating has been deposited on complex shape substrates for WC-Co cemented carbide twist drills. The cutting performances of diamond-coated drills are improved further by the new pretreatment and CVD process. It is of great significance for the fabrication and application of the diamond-coated tools with complex geometries.

Using active carbon pellet as substrate for deposition diamond by MPCVD

The Effect of Depositing Time on the Mpcvd of Diamond on Porous Carbon Monolith

A new pretreatment method for WC-Co substrate for CVD deposition

THE DEVELOPMENT OF MICROWAVE PLASMA CHEMICAL VOPOR DEPOSITION FACILITIES FOR DIAMOND FILMS

Investigation of depositing diamond films and nucleation on alumina substrates by microwave plasma CVD

Gas-jet MPCVD synthesis of diamond coatings on substrates of various materials

Deposition of Microcrystalline Diamond Films in H2 Microwave Plasma with Graphite Powder As Hydrocarbon Precursor

Growth of Nanocrystalline Diamond Films on Co-Cemented Tungsten Carbide Substrates by Hot Filament CVD

Diamond-Like Carbon Thin-Film Deposition Using A Magnetically Confined Rf Pecvd System

Morphologies and structures of chemical vapor deposited diamond films and film-substrate interfaces

A New Multiple Chemical Pretreatment For Fabrication Of High Quality Cvd Diamond-Coated Drills

CVD Grow of Nano Diamond and Other Carbon Materials on Porous Carbon

Study on deposition and characterization of diamond coated cylinder-shaped substrate

Elective Deposition of Diamond Films on Si (100) Substrates

Deposition of Smooth Diamond Films with High Adhesive Strength on WC-Co Inserts and Their Cutting Performance in Turning GFRP

Sandblasting Pretreatment for Deposition of Diamond Films on Wc-Co Hard Metal Substrates

Coupling Effects of Methane Concentration and Nitrogen Addition Level on Morphologies and Properties of MPCVD Diamond Films on WC-Co Substrates

Improvement of Adhesive Strength and Surface Roughness of Diamond-Coated Thin Film Tools

Growth of diamond microchannels on micro-grooved graphite substrate by MPCVD

Deposition and Characterization of Nanocrystalline Diamond Films on Co-cemented Tungsten Carbide Inserts

Synthesis and Mechanism Study of Carbon Nanowires, Carbon Nanotubes, and Carbon Pompons on Single-Crystal Diamonds