Abstract:Activated carbon (AC) is a useful and environmentally sustainable catalyst for oxygen reduction in air-cathode microbial fuel cells (MFCs), but there is great interest in improving its performance and longevity. To enhance the performance of AC cathodes, carbon black (CB) was added into AC at CB:AC ratios of 0, 2, 5, 10, and 15 wt % to increase electrical conductivity and facilitate electron transfer. AC cathodes were then evaluated in both MFCs and electrochemical cells and compared to reactors with cathodes made with Pt. Maximum power densities of MFCs were increased by 9-16% with CB compared to the plain AC in the first week. The optimal CB:AC ratio was 10% based on both MFC polarization tests and three electrode electrochemical tests. The maximum power density of the 10% CB cathode was initially 1560 ± 40 mW/m(2) and decreased by only 7% after 5 months of operation compared to a 61% decrease for the control (Pt catalyst, 570 ± 30 mW/m(2) after 5 months). The catalytic activities of Pt and AC (plain or with 10% CB) were further examined in rotating disk electrode (RDE) tests that minimized mass transfer limitations. The RDE tests showed that the limiting current of the AC with 10% CB was improved by up to 21% primarily due to a decrease in charge transfer resistance (25%). These results show that blending CB in AC is a simple and effective strategy to enhance AC cathode performance in MFCs and that further improvement in performance could be obtained by reducing mass transfer limitations.

Power Generation Using Adjustable Nafion/Ptfe Mixed Binders in Air-Cathode Microbial Fuel Cells

Power Generation by Packed-Bed Air-Cathode Microbial Fuel Cells

Air-cathode preparation with activated carbon as catalyst, PTFE as binder and nickel foam as current collector for microbial fuel cells.

Novel Anti-Flooding Poly(Dimethylsiloxane) (pdms) Catalyst Binder for Microbial Fuel Cell Cathodes

Increased Performance of Single-Chamber Microbial Fuel Cells Using an Improved Cathode Structure

Polyvinylidene fluoride effects on the electrocatalytic properties of air cathodes in microbial fuel cells

Effects of different Pt-M (M = Fe, Co, Ni) alloy as cathodic catalyst on the performance of two-chambered microbial fuel cells

Electrospun Fiber Mat Cathode with Platinum‐Group‐Metal‐Free Catalyst Powder and Nafion/PVDF Binder

Enhanced Oxygen Reduction upon Ag-Fe-doped Polyacrylonitrile@UiO-66-NH 2 Nanofibers to Improve Power-Generation Performance of Microbial Fuel Cells

Immobilization of a Metal-Nitrogen-Carbon Catalyst on Activated Carbon with Enhanced Cathode Performance in Microbial Fuel Cells.

The performance of microbial fuel cell with sodium alginate and super activated carbon composite gel modified anode

Ionomer Cross-Linking Immobilization of Catalyst Nanoparticles for High Performance Alkaline Membrane Fuel Cells

Enhancement of Mass Transport in Catalyst Layers of HT-PEMFC with Tetrafluorophenyl Phosphonic Acid Binder

Binder-free Fe Nano Oxides Decoration for Stimulating Power Generation in Microbial Fuel Cell: Effects on Electrode Substrates and Function Mechanism

Nano-Fe3C@2D-NC@CC as anode for improving extracellular electron transfer and electricity generation of microbial fuel cells

Enhanced Activated Carbon Cathode Performance for Microbial Fuel Cell by Blending Carbon Black

Application of nitrogen-doped carbon powders as low-cost and durable cathodic catalyst to air-cathode microbial fuel cells.

Nafion Effect on Dual-Bonded Structure Cathode of Pemfc

Improved Interfacial Oxygen Reduction by Ethylenediamine Tetraacetic Acid in the Cathode of Microbial Fuel Cell

The effect of water proofing on the performance of nickel foam cathode in microbial fuel cells

Power Generation Using an Activated Carbon and Metal Mesh Cathode in A Microbial Fuel Cell