Abstract:A new and simplified approach for making cathodes for microbial fuel cells (MFCs) was developed by using metal mesh current collectors and inexpensive polymer/carbon diffusion layers (DLs). Rather than adding a current collector to a cathode material such as carbon cloth, we constructed the cathode around the metal mesh itself, thereby avoiding the need for the carbon cloth or other supporting material. A base layer of poly(dimethylsiloxane) (PDMS) and carbon black was applied to the air-side of a stainless steel mesh, and Pt on carbon black with Nafion binder was applied to the solution-side as catalyst for oxygen reduction. The PDMS prevented water leakage and functioned as a DL by limiting oxygen transfer through the cathode and improving coulombic efficiency. PDMS is hydrophobic, stable, and less expensive than other DL materials, such as PTFE, that are commonly applied to air cathodes. Multiple PDMS/carbon layers were applied in order to optimize the performance of the cathode. Two PDMS/carbon layers achieved the highest maximum power density of 1610 +/- 56 mW/m(2) (normalized to cathode projected surface area; 47.0 +/- 1.6 W/m(3) based on liquid volume). This power output was comparable to the best result of 1635 +/- 62 mW/m(2) obtained using carbon cloth with three PDMS/carbon layers and a Pt catalyst. The coulombic efficiency of the mesh cathodes reached more than 80%, and was much higher than the maximum of 57% obtained with carbon cloth. These findings demonstrate that cathodes can be constructed around metal mesh materials such as stainless steel, and that an inexpensive coating of PDMS can prevent water leakage and lead to improved coulombic efficiencies.

Novel Anti-Flooding Poly(Dimethylsiloxane) (pdms) Catalyst Binder for Microbial Fuel Cell Cathodes

Microbial Fuel Cell Cathodes with Poly(dimethylsiloxane) Diffusion Layers Constructed Around Stainless Steel Mesh Current Collectors

Poly(vinylidene Fluoride-Co-hexafluoropropylene) Phase Inversion Coating As a Diffusion Layer to Enhance the Cathode Performance in Microbial Fuel Cells

Single-Step Fabrication Using A Phase Inversion Method of Poly(Vinylidene Fluoride) (pvdf) Activated Carbon Air Cathodes for Microbial Fuel Cells

Power Generation Using Adjustable Nafion/Ptfe Mixed Binders in Air-Cathode Microbial Fuel Cells

Polyvinylidene fluoride effects on the electrocatalytic properties of air cathodes in microbial fuel cells

Air-cathode preparation with activated carbon as catalyst, PTFE as binder and nickel foam as current collector for microbial fuel cells.

The effect of water proofing on the performance of nickel foam cathode in microbial fuel cells

A Novel Stainless Steel Mesh/cobalt Oxide Hybrid Electrode for Efficient Catalysis of Oxygen Reduction in a Microbial Fuel Cell.

Mitigating External and Internal Cathode Fouling Using a Polymer Bonded Separator in Microbial Fuel Cells.

Mesh optimization for microbial fuel cell cathodes constructed around stainless steel mesh current collectors

Power Generation by Packed-Bed Air-Cathode Microbial Fuel Cells

A Novel Cathode Gas Diffusion Layer for Water Management of Passive Μ-Dmfc

Polyelectrolyte-single Wall Carbon Nanotube Composite As an Effective Cathode Catalyst for Air-Cathode Microbial Fuel Cells.

The Use of Double-Sided Cloth Without Diffusion Layers As Air-Cathode in Microbial Fuel Cells

Improving MFC efficiency in power generation and COD removal by using protic ionic liquid in MWCNT-CS-2-aminothiazole-SO 3 H nanoparticle-infused sulfonated PES

Biofouling Inhibition on Nano-Silver/ferrous Sulfide/partly-Graphitized Carbon Cathode with Enhanced Catalytic Activity and Durability for Microbial Fuel Cells

A design of gas diffusion media for polymer electrolyte membrane fuel cell: Characterization and water management investigation

Enhanced Performance of Microbial Fuel Cell with Polyaniline/sodium Alginate/carbon Brush Hydrogel Bioanode and Removal of COD

Silver nanowire-doped conductive polymer hydrogel anode for increasing electron transfer and COD removal rate simultaneously in microbial fuel cell

Power generation using carbon mesh cathodes with different diffusion layers in microbial fuel cells