Abstract:The present study investigated the microstructure, phase transformation behavior, and functional characteristics of the multicomponent Ti–Ni–Cu–Al–V shape memory alloys with the different annealing treatments. The results indicated that the multicomponent Ti–Ni–Cu–Al–V alloy annealed at 673 K/5 min was primarily composed of the B2 parent phase and Ti2(Ni,Cu) type precipitates distributing along the grain boundaries. As the annealing temperature increased and the annealing time extended, the chemical composition of the matrix changed slightly due to the precipitation of the Ti2(Ni,Cu) phase. Consequently, the martensitic phase (B19) gradually appeared and the volume friction of the martensite phase gradually increased. The phase constituents of the present Ti–Ni–Cu–Al–V shape memory alloy evolved from a B2 austenite phase to a B19 martensite phase with the annealing temperature/time increasing. Additionally, as the annealing temperature and time increased, the grain size also increased. The increment in annealing temperature and the prolongation of annealing time resulted in an increase of martensitic transformation temperatures as a result of the comprehensive effect of chemical composition, grain size, defects’ density, etc. Both yield strength and fracture strength decreased, while the elongation significantly increased (reaching 28% at 1123 K/60 min) with the annealing temperature rising and annealing time prolonging. Under the successively applied prestrain to 8% condition, the recoverable strain decreased from 4.2% to 1.7% for the annealed Ti–Ni–Cu–Al–V shape memory alloy with the annealing temperature/time increasing.

Influence of Vacancy-Type Defects on the Stabilization and Shape Memory Effect of CuAlZnMnNi Martensite

Stabilization of deformed stress-induced martensite and its effect on shape memory effect in an Fe-Mn-Si-Ni-Co alloy

INFLUENCE OF VACANCY TYPE DEFECTS ON REVERSE TRANSFORMATION AND SHAPE MEMORY EFFECT IN A Cu-Al-Zn-Mn-Ni ALLOY

Effect of Ni alloying on vacancy behavior and damping capacity in martensitic ductile Cu–Al–Mn alloys

Positron-Annihilation Study of Defects in Thermoelastic Martensite-Transformation of Cu-Base Shape Memory Alloy

Re-examination of martensitic stabilization in Cu-based shape memory alloys Part II. Key factors determining occurrence of martensitic stabilization in Cu-based alloys

Effect of Cu content on martensitic transformation and shape memory behavior in Ti31.5Hf15Zr5Ni48.5−xCux alloys

Quantitative analysis of microstructure evolution in shape memory alloys during martensitic transformation

Time effect of martensitic transformation in Ni43Co7Mn41Sn9

Residual stress induced stabilization of martensite phase and its effect on the magneto-structural transition in Mn rich Ni-Mn-In/Ga magnetic shape memory alloys

Study of the stabilization of ordered austenite β1 in Cu79Al19X2 (X = Be or Mn) alloys

Thermal and structural analysis of Ni50Mn50−xInx shape memory alloys

Effect of microstructure of austenite on the shape memory effect in an Fe-Mn-Si-Ni alloy

A Study of Structure of Metastable Cu–Zn Alloys with Shape Memory Effect

The Influence of Cu on Martensite Phase Transition of High Temperature Shape Memory Alloy

Mechanism of Stress Induced γ→ε Martensite Transformation in an Fe-Mn-Si Shape Memory Alloy

Microstructural features, martensitic transformation, and functional properties of multicomponent Ti–Ni based shape memory alloys

Martensite transformation, mechanical properties and shape memory effects of Ni-Mn-In-Mg shape memory alloys

Microstructure and martensitic transformation behavior of CuAlNb high temperature shape memory alloy

Martensitic Transformation and Shape Memory Effect in Ni54.75Mn13.25Fe7Ga25 Ferromagnetic Shape Memory Alloy

Influence Of Annealing On The Damping Behavior Of Ni-Cu-Mn-Ga Ferromagnetic Shape Memory Alloys