Abstract:In the seismic design of acceleration-sensitive nonstructural components, floor acceleration response spectra are commonly selected for analysis, which has proven to be effective in practice. To accurately study the floor acceleration response spectrum of a reinforced concrete structure under earthquakes, a 3-story reinforced concrete frame structure designed based on Chinese codes was built and placed on a shaking table for testing to obtain actual floor acceleration response for investigation of spectral characteristics. In addition, a set of finite element models of reinforced concrete frame buildings were analyzed to better study the variation of floor acceleration peaks and response spectra with different modal periods. The results show that floor dynamic magnification is highly related to structural dynamic characteristics and building's relative height. Obvious peaks are observed in the floor response spectrum, which correspond to the structural modal periods. The values of the spectra, particularly the peaks, show a strong correlation with the floor level and the damping ratios of nonstructural components. Based on the observations gained from shaking table tests and numerical study, a function for predicting the floor dynamic magnification factor and a method for generating the spectral amplification factor of the floor are proposed. Then the findings acquired from the test, numerical study, and existing methods were applied for the validation of the proposed methods. It is shown that the proposed floor dynamic magnification factor prediction function and spectral amplification factor prediction method are useful for the seismic design of nonstructural components in various reinforced concrete structures, taking into account the structural dynamic characteristics, the floor level, and the damping ratio of nonstructural components.

Study on test and culculation of vibration serviceability of cast-in-situ prestressed concrete hollow floor structures

Study on Natural Frequency of Concrete Floor Based on Vibration Serviceability

VIBRATION COMFORT ANALYSIS AND DESIGN OF CONCRETE FLOOR BASED ON ANNOYANCE RATE

Vibration Reduction for Brick-concrete Buildings in an Old Residential Area

Vibration Serviceability Analysis of Floor Structures under Pedestrian Loads

Vibration Behavior of Composite Cold-Formed Steel Floors with Concrete Topping due to Heel-Drop Loading

Field Measurement-Based Pedestrian-Induced Vibration Analysis and Comfort Evaluation of a Steel Truss Footbridge

Peak Acceleration Response Spectrum of Long Span Floor Vibration by Pedestrian Excitation

Vibration Tests and Crack Analyses on Multi-Storeys Industrial Factory Buildings

Investigation on stress increments of unbounded pre-stressed strands of cast-in-situ concrete hollow floor slabs

Static test of a simple support pre-stressed concrete hollow slab with two-way tube fillers

Floor acceleration amplification and response spectra of reinforced concrete frame structure based on shaking table tests and numerical study

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Field test study for evaluation of vibration control capacity of cracked mass concrete layer

Finite Element Analysis Of The Bearing Properties Of The Floor Structure Of Precast Inclined Support Cold-Formed Steel Building

Vibration serviceability of hybrid CLT-steel composite floors based on experimental and numerical investigations using random walk models

SERVICEABILITY ANALYSIS AND STUDY OF A LONG SPAN TWO WAY STEEL-CONCRETE COMPOSITE BEAM FLOOR SYSTEM FOR WUCHANG RAILWAY STATION

Vibration Performance Evaluation of Cold-Formed Steel and Plywood Composite Floors

Stochastic Vibration of a Long-Span Floor under Crowd-Induced Rhythmic Excitation

Vibration Study on Closed Profiled Steel Sheeting Concrete Composite Slabs

Experimental study on loading rate and notch-to-depth ratio effects on flexural performance of self-compacting concrete with acoustic emission and digital image correlation technologies