Vibration Performance Evaluation of Cold-Formed Steel and Plywood Composite Floors
Suleiman A. Al-Hunaity,Harry Far
DOI: https://doi.org/10.1142/s0219455424502699
IF: 2.9568
2024-02-15
International Journal of Structural Stability and Dynamics
Abstract:International Journal of Structural Stability and Dynamics, Ahead of Print. In this study, experimental natural frequencies and mid-span deflections were used to assess the tested composite floors against vibration serviceability limit states adopted by different standards such as AS3623. It was found that existing design criteria have predicted inconsistent results. Further, the finite element (FE) model was created, updated, and validated against the experimental modal parameters. The validated numerical model examined how various design parameters, such as material properties, cross-section geometry, and achieved a degree of composite action, have influenced the vibration properties such as natural frequencies and mode shapes. It was shown that as the added mass became more dominant than the stiffness enhancement, the fundamental natural frequency of the floor system dropped. This was evident from the results of the plywood slab thickness and the added permanent load parameters. On the other hand, the fundamental natural frequency increased with thicker and deeper joist sections since they made the floor system stiffer.
engineering, mechanical,mechanics, civil