Experimental study on mechanical behavior and vibration characteristic of re-entrant trough profiled steel sheeting-light weight concrete composite slAbs

YANG Yong,NIE Jianguo,YANG Wenping,ZHOU Pijian

2008-01-01

Abstract:The re-entrant trough profiled steel sheeting-light weight concrete composite slAbs was composed of re-entrant trough profiled steel sheeting named BONDECK II and light weight concrete.Experiment of six specimens of the composite slAbs was conducted to study its mechanical behaviors and the design method.Based on the experiment results,the influence of the shear-span of the slAbs was particularly studied.During the experimental study,the failure modes,strain of concrete and steel sheeting,the cracks pattern and the slippage at interface were studied in detail.The bearing capacity of the six specimens was focused on and the calculation formulas of the bearing capacity and rigidity of the closed profiled steel sheeting-light weight concrete composite slAbs were founded.Based on the experimental results,it was denoted that the composite slab specimens loaded at small nominal shear-span ratio failed in longitudinal bonding failure mode,and the composite specimens loaded at large nominal shear-span ratio failed in shear-bending failure mode,which was a failure mode close to the bending failure,and the composite slab specimens showed good ductility and bearing capacity.The bearing capacity calculation method was established,and the rigidity calculation method was also introduced and verified.Furthermore,the vibration characteristic including the vibration frequencies and damping ratios of the six composite slAbs were also tested in the experiment,it was found that all the test damping ratio of the specimens were small.Based on comparing test result and calculated results of the first phase vibration frequencies,the empirical calculating formula was verified.All these will be helpful to the vibration analysis and control of the re-entrant trough profiled steel sheeting-concrete composite slAbs and composite floors with composite slAbs.