Abstract:Morphology development at the fiber/matrix interphase in fiber-reinforced isotactic polypropylene composites is a widely studied topic. While the application of shear flow may strongly enhance the nucleation density around the fiber, little is known about the influence of fibers on the crystallization of polypropylene subjected to an extensional flow. In this work, the flow around a single glass fiber upon uniaxial elongation of the melt is examined using X-ray scattering and diffraction techniques and compared to the response measured for the neat matrix. A comparison between a neat and compatibilized matrix is made given the strong influence of the addition of an adhesion modifier on the bulk crystallization kinetics of polypropylene. The flow is applied using an in-house-built filament stretching extensional rheometer, which, due to its midfilament control scheme, allows for in situ X-ray experiments. Combined small-angle X-ray scattering/wide-angle X-ray diffraction patterns are acquired during the flow and subsequent crystallization step. Postcrystallization area scans of the filament show that the introduction of a single glass fiber gives rise to the development of β-phase crystals, particularly in the area around the fiber ends, and in contrast to what is observed for the matrix materials alone, where solely α-phase is found. Surprisingly enough, the addition of a single fiber (0.00045 vol %) alters the crystallizing polymorph in almost the entire filament. However, the addition of the adhesion modifier hinders the formation of β-phase crystals around the fiber due to an acceleration of the bulk crystallization kinetics. Finite element simulations provide insight into the flow field around the fiber during stretching and demonstrate that the flow is no longer uniaxial extension, but dominated by shear, even though the volumetric amount of fiber as compared to the matrix is negligible. These findings explain the experimental observation of substantial β-phase formation after the introduction of a single fiber, while this is not observed in the matrix material. Worth noting, the formation of β-phase polypropylene depends not only on the presence and the strength of the flow but predominantly on the type of flow, i.e., shear as opposed to elongation.

Extension‐Enhanced Conductivity of Liquid Crystalline Polymer Nano‐Composites

High Thermal Conductive Liquid Crystal Elastomer Nanofibers

Extensional flow of bulk polymers studied by dynamic Monte Carlo simulations

Enhancing the electrical and thermal conductivities of polymer composites via curvilinear fibers: An analytical study

Fiber-Induced Crystallization in Elongational Flows

Extension-Induced Crystallization of Poly(Ethylene Oxide) Bidisperse Blends: an Entanglement Network Perspective

Molecular Dynamics Simulation Of The Conductivity Mechanism Of Nanorod Filled Polymer Nanocomposites

Preparation of super-toughened Poly(L-lactide) composites under elongational flow: A strategy for balancing stiffness and ductility

Elongational Rheology of Glass Fiber-Filled Polymer Composites

Extensional Viscosity of A Thermotropic Liquid Crystalline Polymer Measured by Thread Disintegration Method

Analytical modeling of the electrical conductivity of CNT-filled polymer nanocomposites

A Molecular Theory for Liquid Crystal Elastomers: Nematic Ordering, Shape Deformation and Mechanical Response

Through-thickness Thermal Conductivity Enhancement and Tensile Response of Carbon Fiber-Reinforced Polymer Composites

Extensional Flow-Induced Conductive Nanohybrid Shish in Poly(lactic Acid) Nanocomposites Toward Pioneering Combination of High Electrical Conductivity, Strength, and Ductility

Influence of Chain Interaction and Ordered Structures in Polymer Dispersed Liquid Crystalline Membranes on Thermal Conductivity

Dielectric Properties and Conductivity of Carbon Nanofiber/semi-Crystalline Polymer Composites

Rheological, Dynamic Mechanical and Thermal Properties of Thermotropic Liquid Crystalline Polymer/Unsaturated Polyester/Glass Fiber Hybrid Composites

Further improvement of lattice thermal conductivity from bulk crystalline to 1-D-chain polyethylene: A high-yet-finite thermal conductivity using first-principles calculation

Molecular Dynamics Simulations Of The Effect Of Elastocapillarity On Reinforcement Of Soft Polymeric Materials By Liquid Inclusions

BEHAVIOR OF A LIQUID CRYSTAL POLYMER AFTER ELONGATION FLOW TREATMENT

A New Ultra Fast Conduction Mechanism in Insulating Polymer Nanocomposites