Abstract:Crystalline ultra-high molecular weight polyethylene (UHMWPE) has the highest reported thermal conductivity at room temperature: 104 W/m·K, while theoretical predictions proposed an even higher value of 300 W/m·K. Defects and amorphous fraction in practical UHMWPE fibers significantly reduces the thermal conductivity from the ideal value. Although the amorphous effect can be readily analyzed based on the effective medium theory, the defect effects are poorly understood. This work reports on the temperature-dependent behavior (down to 22 K) of thermal diffusivity and conductivity of UHMWPE fibers in anticipation to observe the reduction in phonon density and scattering rate against temperature, and freeze out high momentum phonons to clearly observe the defect effects. By studying the temperature-dependent behavior of thermal reffusivity (Θ: inverse of thermal diffusivity) of UHMWPE fibers, we are able to quantify the defect effects on thermal conductivity. After taking out the amorphous region's effect, the residual thermal reffusivity (Θ0) for the studied two samples at the 0 K limit is determined as 3.45×10(4) s/m(2) and 2.95×10(4) s/m(2), respectively. For rare/none-defects crystalline materials, Θ0 should be close to zero at the 0 K limit. The defect-induced low-momentum phonon mean free path is determined as 8.06 and 9.42 nm for the two samples. They are smaller than the crystallite size in the (002) direction (19.7 nm) determined by x-ray diffraction. This strongly demonstrates the diffuse phonon scattering at the grain boundaries. The grain boundary thermal conductance (G) can be evaluated as G≈βρcpv with sound accuracy. At room temperature, G is around 3.73 GW/m(2)·K for S2, comparable to that of interfaces with tight atomic bonding.

Further improvement of lattice thermal conductivity from bulk crystalline to 1-D-chain polyethylene: A high-yet-finite thermal conductivity using first-principles calculation

Lattice Dynamics and Thermal Conductivity of Lithium Fluoride Via First-Principles Calculations

Lattice Dynamics and Thermal Conductivity of Cesium Chloride Via First-Principles Investigation

Thermal Conduction in a Single Polyethylene Chain Using Molecular Dynamics Simulations

Extremely High Thermal Conductivity of Aligned Polyacetylene Predicted using First-Principles-Informed United-Atom Force Field

Origin of high thermal conductivity in disentangled ultra-high molecular weight polyethylene films: ballistic phonons within enlarged crystals

Effect of Chain Configuration on Thermal Conductivity of Polyethylene——A Molecular Dynamic Simulation Study

Novel Polyethylene Fibers of Very High Thermal Conductivity Enabled by Amorphous Restructuring.

Efficient Calculation of the Lattice Thermal Conductivity by Atomistic Simulations with Ab Initio Accuracy

Thermal Conductivity of Ultra-high Molecular Weight Polyethylene Crystal: Defect-effect Uncovered by 0 K limit Phonon Diffusion.

Enhancing thermal conductivity of bulk polyethylene along two directions by paved crosswise laminate

An interpretable formula for lattice thermal conductivity of crystals

Thermal conductivity of straight-chain polytetrafluoroethylene: A molecular dynamics study

Thermal Conductivity of Polyvinylidene Fluoride Films with a Multi-Scale Framework

High Thermal Conductivity of Polyethylene Nanowire Arrays Fabricated by an Improved Nanoporous Template Wetting Technique

Temperature Effects in the thermal conductivity of aligned amorphous Polyethylene -- A molecular Dynamics study

High Thermal Conductivity Polymer Chains with Reactive Groups: a Step Towards True Application

Nanostructured Polymer Films with Metal-like Thermal Conductivity

Tuning Thermal Transport in Chain-Oriented Conducting Polymers for Enhanced Thermoelectric Efficiency: A Computational Study

High thermal conductivity of liquid crystalline monomer‐poly (vinyl alcohol) dispersion films containing microscopic‐ordered structure

Experimental Study of Thermal Conductivity of Polyethylene Nanowire Arrays Fabricated by the Nanoporous Template Wetting Technique