Carbon Nanotube Array/Polymer Core/Shell Structured Composites with High Dielectric Permittivity, Low Dielectric Loss, and Large Energy Density
Haiyang Liu,Yang Shen,Yu Song,Ce-Wen Nan,Yuanhua Lin,Xiaoping Yang
DOI: https://doi.org/10.1002/adma.201102079
IF: 29.4
2011-01-01
Advanced Materials
Abstract:Polymer-based composites have been found to be widely attractive in the past few years because of their great potential in various fi elds. [ 1–7 ] Exploring polymer-based dielectrics with high energy density ( J = κ 0 κ E 2 /2), i.e., high dielectric permittivity (highκ ), high breakdown electric fi eld (highE ), and low dielectric loss (low tan δ ), has recently aroused considerable interest. [ 1 , 8 , 9 ] However, the relative dielectric permittivity of polymers is very low ( κ < 5) while the breakdown electric fi eld ( E > 200 kV mm − 1 ) remains high. [ 1 , 4 , 5 ] Thus, a key issue is to enhance dielectric permittivity of polymers while retaining other excellent performances. One common approach is to add highκ ceramic fi llers (e.g., BaTiO 3 , Pb(Zr,Ti)O 3 , CaCu 3 Ti 4 O 12 , etc) into polymers, which can increase κ by about ten times relative to the polymer matrix. [ 10–14 ] However, high loading of the ceramic fi llers (usually over 50 vol%) dramatically decreases the mechanical properties of the polymer matrix. Another strategy is to fabricate percolative composite capacitors by adding conductive fi llers (e.g., metal particles and carbon nanotubes) into polymers. [ 4 , 5 , 15 , 17 ] As the volume fraction of the fi llers increases to the percolation threshold, κ of the composites can be dramatically enhanced. However, the dielectric loss of these percolative composites is usually quite high due to the insulator–conductor transition near the percolation threshold. Among these conductive fi llers in polymer-based composites, carbon nanotubes (CNTs) have a large aspect ratio and present unique mechanical properties, showing high electrical and thermal conductivity values. [ 16–18 ] CNT/polymer composites have been pursued with the hope of delivering CNT properties to a processable and synergistic host. [ 19–21 ] With respect to the electrical properties of CNT/polymer composites, the dielectric properties of CNT/polymer composites were reported, and it was found that these materials showed different dielectric properties depending on the polymer matrix and dispersion of CNTs in the composites. [ 16 , 17 , 21 , 22 ] Several methods have been