Abstract:This study aims to solve the problem of springback control of aluminum alloy components in the rolling process, and the method of combining experiment and simulation is adopted. Firstly, a series of aluminum alloy samples are designed, and the four-axis flexible bending machine is used for precision roll bending. Secondly, the three-dimensional (3D) shape change data of the workpiece before and after roll bending is monitored and recorded in real-time by a high-precision 3D scanner. Meanwhile, aiming at different rolling process parameters of each group (including roll bend speed, feed rate, pre-deformation amount, mold curvature radius, and other factors), advanced finite element software is used to carry out detailed simulation and calculations. In addition, the coincidence is compared and analyzed between the actual experiment results and the simulation prediction. The stress-strain distribution and springback evolution of aluminum alloy during roll bending are described accurately. The experimental and simulation results show that the springback rate of aluminum alloy fluctuates in the range of 5% to 15% after four-axis flexible roll bending, and the specific springback value is influenced by various process parameters. For example, under the premise of keeping other conditions unchanged, when the roll bending speed is increased from 30mm/s to 60mm/s, the springback rate shows an upward trend of about 3%. By increasing the feed rate by 20%, an average decrease of about 7% in springback quantity is observed. It can be seen that the increase in roll bending speed can aggravate the springback phenomenon, and the appropriate increase in feed rate can play a certain role in restraining the springback. Further analysis shows that the choice of the mold curvature radius and pre-deformation amount also has a decisive influence on the springback characteristics. There is a nonlinear relationship between the two parameters and the amount of springback. Changing these two parameters in a specific range can effectively regulate the springback effect.

Mechanism of Springback Influence on Stiffness of Automotive Cylindrical Shallow Panels

Modified Fourier-Galerkin Solution For Aerospace Skin-Stiffener Panels Subjected To Interface Force And Mixed Boundary Conditions

RIGIDITTY OF WELDED HOLLOW SPHERICAL JOINTS ON FINITE ELEMENT ANALYSIS PRECESION OF RETICULATED SHELLS

Spring Back Behavior of Large Multi-Feature Thin-Walled Part in Rigid-Flexible Sequential Loading Forming Process

Effect of complicated deformation behaviors during cold stamping on springback prediction of DP980 steel

Study on the Influencing Factors and Forming Process Selection of Sheet Metal Bending Spring Back Defects

Analysis of springback for multiple bending considering nonlinear unloading-reloading behavior, stress inheritance and Bauschinger effect

The prediction and control on the springback of the front inner panel of automobile at multi-steps stamping

Improving the Accuracy of Stamping Analyses Including Springback Deformations

Numerical Study Of Springback Laws In Metal Forming Of Diaphragm Of Automotive Horn

Springback compensation for a vehicle’s steel body panel

Investigation on the effect of friction and material behavior models on the springback simulation precision: application to automotive part B-Pillar and material TRIP800 steel

Research on mechanism of springback control by viscous medium with different mechanical properties

Research on springback characteristic in flexible multi-points 3D stretch-bending process

Numerical springback prediction for high-strength aluminum alloys based on the sheet metal upsetting test

A new predicting model study on U-shaped stamping springback behavior subjected to steady-state temperature field

Springback characteristics and influencing laws of four-axis flexible roll bending forming for aluminum alloy

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

A new springback calculation method for double-curved medium thick plates based on the curvature of discrete points

Design and optimization of composite sub-stiffened panels

Effect of Stiffeners on Mechanical Behavior of T-Stubs Based on Experiment and Numerical Simulations