Abstract:Pultruded fiber–reinforced plastic (FRP) composite structural shapes (beams and columns) are thin-walled open or closed sections consisting of assemblies of flat plates and commonly made of E-glass fiber and either polyester or vinylester resins. Due to high strength-to-stiffness ratio of composites and thin-walled sectional geometry of FRP shapes, buckling is the most likely mode of failure before material failure. In this paper, explicit analyses of local buckling of rectangular orthotropic composite plates with various unloaded edge boundary conditions (i.e., (1) rotationally restrained along both unloaded edges (RR), and (2) one rotationally restrained and the other free along the unloaded edges (RF)) and subjected to uniform in-plane axial action at simply-supported loaded edges are first presented. A variational formulation of the Ritz method is used to establish an eigenvalue problem, and explicit solutions of plate local buckling coefficients in term of the rotational restraint stiffness (k) are obtained. The two cases of rotationally restrained plates (i.e., the RR and RF plates) are further treated as discrete plates of closed and open sections, and by considering the effect of elastic restraints at the joint connections of flanges and webs, the local buckling of different FRP shapes under uniform axial compression is studied. The approximate expressions of the rotational restraint stiffness (k) for various common FRP sections are provided, and their application to sectional local buckling predictions is illustrated. The explicit local buckling formulas of rotationally restrained plates are validated with the exact transcendental solutions. The analytical predictions for local buckling of various FRP profiles based on the present discrete plate analysis and considering the elastic restraints of the flange–web connections are in excellent agreements with available experimental results and finite element eigenvalue analyses. A design guideline for local buckling prediction and related performance improvement is proposed. The present explicit formulation can be applied effectively to determine the local buckling capacities of composite plates with elastic restraints along the unloaded edges and can be further used to predict the local buckling strength of FRP shapes.

A Computational Approach For Analysis And Optimal Design Of Frp Beams

Analysis And Design Of Pultruded Frp Shapes Under Bending

Development And Experimental Verification Of Design Equations For Frp Beams

EXPERIMENTAL AND ANALYTICAL EVALUATION OF LATERAL BUCKLING OF FRP COMPOSITE CANTILEVER I-BEAMS

Design Optimization Of Fiber Reinforced Plastic Composite Shapes

Multiobjective material architecture optimization of pultruded FRP I-beams

OPTIMAL DESIGN OF FRP SHAPES FOR STRUCTURAL APPLICATIONS

Predicting deflection of retrofitted reinforced concrete beams

Flexural-Torsional Buckling of Pultruded Fiber Reinforced Plastic Composite I-Beams: Experimental and Analytical Evaluations

Analytical and Experimental Study of Lateral and Distortional Buckling of FRP Wide-Flange Beams

Simplified analysis methods for short-term behavior of FRP-concrete composite beams

Simplified Analysis Of Short-Term Behavior For Hybrid Frp-Concrete Beams

Exploitation of FRP Fabric Reinforcement: Innovation Beyond FRP Bars

Analytical Approach for Flexural Capacity of FRP Prestressed Concrete T-Beams with Non-Prestressed Steel Bars

Design Approach for Flexural Capacity of Concrete T-beams with Bonded Prestressed and Nonprestressed FRP Reinforcements

FEM analysis on innovative FRP/concrete composite beams

Explicit local buckling analysis and design of fiber–reinforced plastic composite structural shapes

Interfacial Mechanical Behaviors of Rc Beams Strengthened with Frp

FEM Analysis of New-Type BFRP Reinforced Concrete Beams' Mechanical Properties

Analytical and Experimental Evaluation of Flexural Behavior of Frp Pultruded Composite Profiles for Bridge Deck Structural Design

Numerical Analysis Of Debonding Mechanisms In Frp-Strengthened Rc Beams