Abstract:Though carbon nanotube (CNT) arrays have tremendous potential due to their attractive mechanical, electrical, and thermal properties, the growth kinetics of CNTs are still not fully understood. Thus, we report on the effect of synthesis parameters, such as growth temperature, on the resulting arrays. In this work, CNT arrays were synthesized using catalytic chemical vapor deposition (CCVD) with furnace temperatures varying from 680 to 900 °C. Microscopy was used to investigate the effect of growth temperature on the structural properties, such as tube diameter, array length, and the amount of amorphous carbon produced at the top of the canopy as a growth by‐product. Additionally, Raman spectroscopy was used to elucidate the effect growth temperature has on the resulting purity of the CNTs. It was then revealed that crystalline inhomogeneity exists along the length of the tubes with respect to crystallinity. Transmission electron microscopy (TEM) further determines the degree of tube crystallinity as well as the thickness of amorphous carbon coating around the nanotubes. Through both microscopy and spectroscopy, we found two distinct temperature regimes within the range of 680–900 °C. Below 800 °C, the growth of tube length and diameter remained relatively stagnant followed by a rapid growth rate above 800 °C with the highest tube crystallinity obtained within the regime of 800–840 °C. This indicates the presence of an important transitional temperature for CNT CCVD growth. Additionally, growth temperature was determined to play an important role in the amount of the resulting amorphous carbon by‐product.

Gas and Pressure Effects on the Synthesis of Amorphous Carbon Nanotubes

Current and Arc Pushing Force Effects on the Synthesis of Single-Walled Carbon Nanotubes by Arc Discharge.

Temperature and Catalyst Effects on the Production of Amorphous Carbon Nanotubes by a Modified Arc Discharge

Catalyst Effect on the Preparation of Single-Walled Carbon Nanotubes by a Modified Arc Discharge

Pressure Effects on Nanotubes Formation Using the Submerged Arc in Water Method

Amorphous Carbon Nanotubes Produced by a Temperature Controlled DC Arc Discharge

Synthesis of carbon nanotubes at different pressure by arc discharge and its characterization

Influence of NH3 Atmosphere on the Growth and Structures of Carbon Nanotubes Synthesized by the Arc-Discharge Method

Catalyst composition and content effects on the synthesis of single-walled carbon nanotubes by arc discharge

Production of Carbon Nanotubes with Different Shapes by Catalytic Pyrolysis of Methane

Effects of Catalyst Composition on the Synthesis of Single-Walled Carbon Nanotubes

Large Scale Synthesis of Single-Wall Carbon Nanotubes by Arc-Discharge Method

Effect of Temperature, Pressure, and Gas Ratio of Methane to Hydrogen on the Synthesis of Double-Walled Carbon Nanotubes by Chemical Vapour Deposition

The Effect of Electric Current on the Synthesis of Single-Walled Carbon Nanotubes by Temperature Controlled Arc Discharge

Effect of metal oxide and oxygen on the growth of single-walled carbon nanotubes by electric arc discharge

The Effect of Hydrogen on the Formation of Nitrogen-Doped Carbon Nanotubes Via Catalytic Pyrolysis of Acetonitrile

Amorphous Carbon Nanotubes Fabricated by Low-Temperature Chemical Vapor Deposition

Catalyst Effects of Fabrication of Carbon Nanotubes Synthesized by Chemical Vapor Deposition

Effect of Growth Temperature on the Synthesis of Carbon Nanotube Arrays and Amorphous Carbon for Thermal Applications

Catalytic Engineering of Carbon Nanotube Production

Large Scale and High Purity Synthesis of Single-Walled Carbon Nanotubes by Arc Discharge at Controlled Temperatures